Upgrade or replace a commercial automatic entrance with the Portalp-Tucker Auto-Mation SW10/19 V/5.3 Automatic Swing Door Operator.

Designed for a 36" single swing door, this 36S configuration combines the proven SW10/19 operator platform with a pull-arm / slide-track assembly, V/5.3 control system, and professional Black finish.

The pull-arm setup is designed for pull-side applications where the door swings toward the operator, making this unit an excellent choice for commercial accessibility upgrades, replacement installations, healthcare facilities, offices, schools, and other high-traffic entrances.

Product Information

• Manufacturer: Portalp / Tucker Auto-Mation

• Model: SW10/19 V/5.3

• Configuration: 36S

• Product: Automatic Swing Door Operator

• Door Configuration: Single Door

• Nominal Door Width: 36"

• Arm Type: Pull Arm

• Arm Configuration: Pull Arm with Slide Track

• Finish: Black

• Control Version: V/5.3

• Mounting: Surface Applied

• Application: Commercial Automatic Swing Doors

• Use: New Installation / Replacement / Retrofit

Key Features

• Designed for 36" single swing doors

• 36S single-door configuration

• Portalp / Tucker Auto-Mation SW10/19 platform

• V/5.3 electronic control

• Pull-arm configuration

• Slide-track pull-side operation

• Professional Black finish

• Surface-mounted design

• Smooth controlled door movement

• Commercial-duty construction

• Suitable for high-traffic entrances

• Can be integrated with compatible activation devices

• Compatible with properly designed low-energy accessibility applications

• Ideal for replacement of existing Tucker Auto-Mation operators

36S Single-Door Configuration

This operator is configured for a:

36" Single Swing Door

The 36S configuration is designed for a standard commercial single-door opening and provides a compact surface-mounted automatic operator solution.

Always verify the actual:

• Door width

• Frame width

• Header space

• Door handing

• Hinge or pivot configuration

before ordering.

Pull Arm / Slide Track Configuration

This operator uses a:

Pull Arm with Slide Track

The pull-arm arrangement is used when the operator is mounted on the side toward which the door swings.

Unlike a conventional articulated push arm, the pull arm operates through a slide track mounted to the door.

The assembly works with the operator to pull the door through its opening cycle and then allow controlled closing.

Pull-Side Installation

Portalp/Tucker installation documentation specifies a dedicated setup for pull-side applications.

Proper installation requires accurate positioning of the:

• Operator header

• Spindle

• Primary arm

• Secondary arm

• Slide block

• Slide track

Correct arm geometry and preload are important for dependable automatic operation.

SW10 / SW19 Operator Platform

The Tucker Auto-Mation SW10/19 platform was developed for commercial automatic pedestrian swing doors.

The platform includes:

• SW10 – Full Power applications

• SW19 – Low Energy applications

The exact operating mode and required safety equipment depend on the installed system and application.

Final setup should follow the applicable automatic-door standard and local code requirements.

V/5.3 Control System

This operator is equipped with the:

V/5.3 Control System

The electronic controller manages the automatic operating sequence and interfaces with compatible activation, safety, and locking equipment.

Typical functions include:

• Activation input

• Powered opening

• Opening-speed control

• Closing-speed control

• Hold-open timing

• Electric-lock interface

• Safety-device inputs

• Operator status and diagnostics

Proper programming and adjustment should be completed during installation.

Automatic Door Operating Sequence

When the operator receives an activation signal:

1. The controller receives the activation input.

2. The operator powers the door open.

3. The door reaches its programmed open position.

4. The door remains open for the selected hold-open period.

5. The system initiates controlled closing.

6. The door returns to the closed position.

This provides convenient automatic access for commercial entrances.

Compatible Activation Devices

Depending on system design, the SW10/19 may be used with compatible devices such as:

• Handicap push plates

• Wireless push buttons

• Touchless activation switches

• Motion sensors

• Card readers

• Keypads

• Key switches

• Access-control relays

Activation devices are sold separately unless specifically included.

Electric Lock Integration

The SW10/19 control system can be incorporated into properly designed systems using compatible:

• Electric strikes

• Magnetic locks

• Electrified locksets

• Access-control systems

The lock and operator sequence must be properly configured so the door is released before powered opening.

Black Finish

This configuration features a:

Black Finish

The dark architectural finish provides a clean, professional appearance for commercial entrances and coordinates especially well with:

• Black storefront framing

• Dark architectural hardware

• Modern commercial interiors

• Dark bronze or black entrance systems

Accessibility Applications

The SW10/19 platform is commonly used in automatic and low-energy pedestrian-door installations.

Possible accessibility activation methods include:

• Wall push plates

• Wireless handicap buttons

• Touchless switches

• Access-control activation

• Remote push buttons

Final compliance depends on the complete installation, operating mode, sensors, door forces, speeds, signage, activation devices, and applicable codes.

Commercial Applications

Ideal for:

• Hospitals

• Medical facilities

• Assisted living facilities

• Retail stores

• Office buildings

• Schools

• Universities

• Government facilities

• Hotels

• Commercial buildings

• Institutional facilities

• Public-access entrances

Replacement & Retrofit Applications

This operator is especially useful when replacing an existing:

Tucker Auto-Mation SW10/19

installation.

Before replacement, inspect the existing:

• Door and frame

• Hinges or pivots

• Header mounting surface

• Arm configuration

• Activation devices

• Safety sensors

• Locking hardware

• Electrical wiring

• Access-control interface

Existing components should not automatically be assumed compatible with a replacement operator.

Professional Installation Recommended

Portalp recommends installation of automated pedestrian-door products by trained automatic-door technicians.

After installation, verify:

• Door opening angle

• Opening speed

• Closing speed

• Hold-open time

• Pull-arm geometry

• Slide-track position

• Spring preload

• Mechanical stops

• Activation devices

• Safety devices

• Electric locking hardware

• Complete automatic-door operation

The complete entrance should be inspected and tested before returning it to normal service.

Important Ordering Information

Before ordering, verify:

• Model: SW10/19 V/5.3

• 36S configuration

• 36" single door

• Pull-arm application

• Black finish

• Pull-side mounting conditions

• Door handing

• Existing header dimensions

• Activation-device requirements

• Safety-device requirements

• Locking-hardware requirements

This listing is for the configured automatic swing-door operator described above. Push plates, sensors, electric locks, access-control equipment, and other field accessories are not included unless specifically stated.