Commercial Request-to-Exit Push Button with Green Illuminated “PUSH TO EXIT” Legend, Stainless Steel Faceplate, Replaceable Lamp and NO/NC Switch Contacts

The BEA 10ACPBSS1 Illuminated Access Control Push Button is a commercial-grade, manually operated request-to-exit switch designed for electronically secured doors, access control systems, and compatible automatic door applications.

Featuring a brightly illuminated green “PUSH TO EXIT” button, the 10ACPBSS1 provides a clearly identifiable location for users to request door release or activation.

The assembly incorporates a durable 304 stainless steel single-gang faceplate, a replaceable illumination lamp, and a mechanical single-pole double-throw (SPDT) momentary switch.

When pressed, the button changes the state of its normally open and normally closed electrical contacts. When released, the switch returns immediately to its normal condition.

With a manufacturer-specified 10-amp maximum contact rating at 125/250VAC and a rugged construction tested for more than one million operations, the BEA 10ACPBSS1 is suitable for properly designed commercial access control installations.

The single-gang faceplate measures approximately 2-3/4 inches wide × 4-1/2 inches high, making it appropriate for compatible electrical box installations.

The illuminated button provides high visibility in interior locations, including corridors, offices, healthcare facilities, commercial buildings, secured rooms, and employee entrances.

Important: The BEA 10ACPBSS1 is a momentary switch with no built-in time delay. It does not contain the adjustable pneumatic timer found in the BEA 10ACPBDA Series.

Key Features & Benefits

• Illuminated Green Button: Clearly identifies the manual exit release location.

• “PUSH TO EXIT” Identification: Provides visible instructions for users.

• Stainless Steel Faceplate: Durable commercial construction.

• Single-Gang Mounting: Fits the specified single-gang mounting arrangement.

• SPDT Momentary Switch: Provides both normally open and normally closed contacts.

• 10A Maximum Contact Rating: Manufacturer-rated switching capacity at 125/250VAC.

• Immediate Contact Return: No built-in release timer or delayed action.

• Replaceable Illumination Lamp: Supports lamp replacement without replacing the complete switch assembly.

• 28V Lamp Supplied Installed: Manufacturer's April 2023 guide identifies a standard installed lamp.

• 14V Alternate Lamp Included: Supports an alternative lamp-voltage configuration when properly installed.

• Interchangeable Lens Covers: BEA's installation guide identifies nine included lens covers.

• Tamper-Resistant Design: Stainless steel faceplate supports secure commercial installation.

• Tested for One Million Operations: Designed for frequent manual use.

• Compatible Access Control Applications: Suitable for properly designed electronic locking and door control systems.

• Low-Light Visibility: Illuminated push button is easy to locate in reduced ambient lighting.

• Commercial Door Hardware Application: Appropriate for compatible request-to-exit and door release systems.

Illuminated “PUSH TO EXIT” Button

The BEA 10ACPBSS1 features a green illuminated button that clearly identifies the intended exit control.

The illuminated display is especially useful where pedestrians must locate the door release control in a hallway, secured area, or other interior environment.

Benefits of Illumination

• Makes the exit button easier to identify

• Provides a visible manual release location

• Helps distinguish the button from nearby wall controls

• Supports use in interior areas with reduced ambient lighting

• Offers replaceable illumination components for maintenance

The illumination circuit is separate from the mechanical switching contacts.

Important: The illuminated button does not automatically indicate whether an electronic lock is secure or released. Any status indication depends on the actual wiring and control configuration.

SPDT Momentary Switch Operation

The BEA 10ACPBSS1 uses a single-pole double-throw mechanical switch.

This arrangement provides three switch connections:

• Common (COM)

• Normally Open (NO)

• Normally Closed (NC)

Normally Open Operation

The normally open contact closes when the button is pressed.

This configuration can provide an activation signal to a compatible access control controller, relay module, or automatic door operator.

Normally Closed Operation

The normally closed contact opens when the button is pressed.

This configuration can be used in appropriately designed circuits where interruption of the contact is required.

Momentary Contact

The switch remains activated only while the button is physically pressed.

When the button is released, the electrical contacts return to their original condition.

Important: The 10ACPBSS1 does not provide an adjustable 2–60-second hold time. An external timer or controller must provide extended release timing when required.

Commercial Access Control Applications

The BEA 10ACPBSS1 can serve as a manual input in compatible access control systems.

Common Applications

• Request-to-exit stations

• Electronic door release

• Electromagnetic lock systems

• Commercial access control panels

• Controlled interior entrances

• Employee entrances

• Security-controlled rooms

• Compatible automatic door activation circuits

When connected to a properly configured controller, pressing the button can initiate the intended door-release or activation sequence.

Life-Safety Consideration: The complete locking system must satisfy applicable building and fire code requirements. This push button alone does not constitute a complete compliant egress system.

Stainless Steel Single-Gang Faceplate

The 10ACPBSS1 features a stainless steel faceplate designed for commercial interior installations.

Faceplate Specifications

• Material: 304 stainless steel

• Mounting style: Single-gang

• Nominal width: 2-3/4 inches

• Nominal height: 4-1/2 inches

• Button color: Green

• Button identification: PUSH TO EXIT

• Switch type: Mechanical momentary

The faceplate provides a durable mounting surface while maintaining a clean, professional appearance.

The product is designed for compatible single-gang electrical boxes and may be installed using BEA's specified surface-mount accessory.

Replaceable Lamp Design

A major maintenance feature of the 10ACPBSS1 is its replaceable illumination lamp.

Rather than replacing the entire switch because of a failed lamp, technicians can service the illumination assembly according to BEA's instructions.

BEA's April 2023 installation guide identifies:

• 28V lamp: Installed in the supplied assembly

• 14V lamp: Included as an alternative

• Interchangeable lens covers: Included for supported display configurations

The appropriate lamp must be selected for the actual supply voltage.

Critical Electrical Warning: BEA warns that supplying the 14V lamp with 15V or more can cause irreparable damage to the switch assembly.

Lamp voltage requirements are separate from the maximum electrical rating of the mechanical switch contacts.

Commercial-Grade Switching Capacity

The 10ACPBSS1 uses a mechanical SPDT switch with the following manufacturer-published ratings:

The switch ratings must be interpreted and applied in accordance with BEA's electrical instructions and the actual connected load.

Important: The 125/250VAC rating applies to the switch contacts. It is not the required voltage for the illumination lamp.

Wiring Information

BEA's April 2023 installation guide identifies the following connection colors:

The switch can be connected using the supplied wiring or directly to the switch terminals as permitted by the manufacturer.

Important: Earlier BEA documentation shows a different switch-wire color arrangement. Use the wiring diagram supplied with the actual product rather than assuming all manufacturing generations use identical colors.

Standard Package Contents

BEA's April 2023 guide identifies the following components with the access control push button:

• (1) BEA illuminated push-button assembly

• (1) Stainless steel single-gang faceplate

• (1) 28V lamp installed

• (1) Alternate 14V lamp

• (2) Standard mounting screws

• (5) Butt-splice connectors

• (9) Interchangeable lens covers

Generally Sold Separately

• BEA 10BOX24SGSM surface-mount box

• Compatible power supply

• Access control logic or timing module

• Electromagnetic lock or electric strike

• Additional field wiring

• Other required egress and fire-alarm release components

Package contents reflect the manufacturer's published installation guide. Verify the contents of the actual supplied inventory where important.

BEA 10ACPBSS1 vs. 10ACPBDA Pneumatic Series

Choose the 10ACPBSS1 when an illuminated, momentary exit button is required and the connected system provides any necessary release timing.

Choose the appropriate 10ACPBDA model when the button itself must provide an adjustable mechanical hold interval.

Recommended Commercial Applications

The BEA 10ACPBSS1 is suitable for appropriately designed interior installations in:

• Commercial office buildings

• Hospitals and healthcare facilities

• Assisted living facilities

• Schools and universities

• Government buildings

• Retail stores and shopping centers

• Employee-only entrances

• Secured offices

• Warehouse personnel entrances

• Institutional buildings

• Electronic access control systems

• Compatible magnetic lock release systems

• Commercial door security retrofits

Installation & Ordering Considerations

Before ordering or installing the BEA 10ACPBSS1:

1. Confirm manufacturer SKU 10ACPBSS1.

2. Verify that a momentary switch is appropriate for the application.

3. Confirm that the required faceplate is single-gang.

4. Check mounting depth and electrical box compatibility.

5. Select the proper illumination lamp for the available voltage.

6. Verify the connected circuit does not exceed the switch rating.

7. Determine whether NO or NC contacts are required.

8. Use the wiring diagram supplied with the actual unit.

9. Provide an appropriate external controller when release timing is required.

10. Confirm the proper operation of any electronic locking hardware.

11. Test all required independent emergency-egress functions.

12. Verify compliance with applicable building, fire, accessibility, and electrical requirements.

Important Safety Notice: When installed with electromagnetic locks or other electronically controlled egress hardware, the complete locking and release arrangement must comply with applicable codes and the requirements of the authority having jurisdiction.

Why Choose the BEA 10ACPBSS1?

The BEA 10ACPBSS1 Illuminated Push-to-Exit Button provides a durable and highly visible manual release control for compatible commercial access control systems.

Featuring a green illuminated “PUSH TO EXIT” button, stainless steel faceplate, SPDT momentary contacts, replaceable lamp, and 10A switching capacity, the 10ACPBSS1 is a practical option for professional electronic door-release installations.

For commercial door contractors, security integrators, and facility maintenance departments, the BEA 10ACPBSS1 delivers straightforward operation, replaceable illumination, and flexible integration with properly engineered access control systems.