Compact Commercial Automatic Door Activation Sensor with Directional Detection, Adjustable Radar Field, Cross-Traffic Filtering & Push-Button Programming

The BEA 10EAGLEARTEK EAGLE ARTEK Microwave Motion Sensor is a commercial-grade radar activation sensor designed to detect approaching pedestrian traffic and activate compatible automatic door systems.

Using advanced 24.15 GHz microwave radar technology, the EAGLE ARTEK provides dependable motion detection for automatic sliding, swinging, revolving, and other compatible pedestrian door applications.

Its compact, low-profile design allows the sensor to integrate discreetly with commercial automatic door headers, while its electronically adjustable detection field provides flexible setup without physically changing the antenna.

The EAGLE ARTEK features direction sensing, adjustable field size and shape, and immunity filtering to help reduce unwanted activations caused by nearby pedestrian movement and cross traffic. These features can help prevent unnecessary door-opening cycles and reduce energy loss at busy commercial entrances.

Designed for professional installation, the BEA 10EAGLEARTEK operates on 12–24V AC/DC, consumes less than 1 watt of power, and features an adjustable detection field with a maximum manufacturer-specified mounting height of 13 feet.

The sensor is also designed for convenient retrofit applications, using mounting references compatible with the earlier BEA EAGLE sensor family and an available plug-in retrofit interface.

Whether replacing an older automatic door motion detector or upgrading an existing commercial entrance, the BEA EAGLE ARTEK offers reliable radar activation, flexible detection settings, and compact commercial construction.

Important: The EAGLE ARTEK is an automatic door motion activation sensor, not a dedicated presence safety sensor. Required safety and presence detection must be provided by the approved automatic door system.

Key Features & Benefits

• 24.15 GHz Microwave Radar: Advanced motion detection technology for automatic pedestrian door activation.

• Commercial Automatic Door Compatibility: Suitable for appropriately configured sliding, swinging, revolving, and other automatic door applications.

• Compact Low-Profile Housing: Measures approximately 4.72" × 1.96" × 1.96".

• Directional Detection: Supports detection settings that distinguish approaching movement from other traffic patterns.

• Cross-Traffic Filtering: Helps reduce unwanted door activation from pedestrians traveling parallel to the opening.

• Adjustable Detection Field: Electronic configuration of detection width and depth.

• No Manual Antenna Replacement: Field shape can be modified electronically without physically changing the radar antenna.

• Push-Button Programming: Convenient local sensor adjustment and setup.

• Remote Programming Compatibility: Supports the BEA universal remote control.

• 12–24V AC/DC Operation: Compatible with properly configured commercial automatic door controllers.

• Low Power Consumption: Less than 1 watt.

• Solid-State Relay Output: Polarity-independent electronic output for compatible controls.

• 6–13 Foot Mounting Range: Manufacturer-specified installation height.

• IP54 Protection: Rated protection against dust and splashing water.

• Retrofit-Friendly Design: Suitable for many existing BEA EAGLE installations with the correct interface and mounting arrangement.

• Adjustable Mounting Angles: Vertical and lateral alignment for the intended detection field.

• 8-Foot Cable: Manufacturer-specified connection cable length.

24.15 GHz Microwave Radar Technology

The BEA EAGLE ARTEK uses microwave radar to detect movement within an electronically configured detection field.

When a person moves into the designated activation area, the sensor provides an output signal to the compatible automatic door controller.

The controller then operates the automatic door according to its programmed sequence.

Radar Detection Features

• Operating frequency: 24.15 GHz

• Motion-based detection

• Adjustable detection zone

• Direction-sensitive operation

• Configurable sensitivity and filtering

• Minimum detectable movement speed: 2 inches per second

• Compatible solid-state relay output

The EAGLE ARTEK is designed for applications where reliable pedestrian approach detection is required.

Adjustable Wide & Narrow Detection Fields

The EAGLE ARTEK provides electronically adjustable detection fields so technicians can configure the sensor according to the entrance width and expected pedestrian traffic.

Maximum Published Detection Areas at a 7-Foot Mounting Height

The wide pattern is useful for compatible larger commercial entrances, while the narrow configuration can help focus detection within a more limited approach area.

Actual detection coverage depends on mounting height, angle, sensitivity, surrounding conditions, and the selected programming.

Directional Detection & Cross-Traffic Rejection

One of the primary advantages of the BEA 10EAGLEARTEK is its ability to manage unwanted activations through configurable detection settings.

Commercial entrances frequently experience pedestrian traffic passing across the front of an automatic door without an intention to enter.

The EAGLE ARTEK offers direction-sensitive detection and filtering that can help distinguish approaching traffic from movement traveling parallel to the doorway.

Benefits of Directional Detection

• Helps reduce unnecessary door openings

• Reduces activation from certain cross-traffic movements

• Can minimize unwanted door cycling

• Supports more efficient automatic entrance operation

• Helps reduce conditioned-air loss

• Improves sensor performance in high-traffic areas

Sensor performance depends on the mounting position and correctly configured detection parameters.

Electronic Radar Field Adjustment

Unlike older motion sensors that require manual repositioning or replacement of antenna components to change the detection pattern, the EAGLE ARTEK supports electronic field-shape adjustment.

Technicians can configure the radar field using the sensor's onboard push buttons or compatible remote programming.

Adjustable Settings Include

• Detection mode

• Radar field size

• Radar field shape

• Immunity filtering

• Directional detection behavior

• Supported operating parameters

This flexibility makes the sensor useful for both new installations and commercial entrance retrofits.

Compact Commercial Design

The BEA 10EAGLEARTEK is designed to provide effective pedestrian motion detection within a compact housing.

Physical Design Features

• Approximately 4.72" long

• Approximately 1.96" high

• Approximately 1.96" deep

• Durable ABS housing

• Compact automatic door header installation

• Compatible mounting accessories available

• Adjustable radar antenna alignment

The slim profile provides a discreet appearance when installed above a commercial automatic entrance.

Adjustable Mounting Height & Radar Angle

The EAGLE ARTEK can be installed across a range of commercial door heights.

Mounting Specifications

• Manufacturer mounting height: 6–13 feet

• Vertical adjustment: 0°–90°

• Lateral adjustment: -30° to +30°

• Adjustable sensing field

• Header or other manufacturer-approved mounting arrangement

The correct mounting height and angle depend on the door configuration, pedestrian approach area, and required activation field.

12–24V AC/DC Electrical Operation

The BEA 10EAGLEARTEK supports common low-voltage automatic door control systems.

Electrical Specifications

• Input voltage: 12–24 VAC ±10%

• AC frequency: 50–60 Hz

• Input voltage: 12–24 VDC, +30% / -10%

• Maximum power consumption: Less than 1 watt

• Output: Polarity-independent solid-state relay

• Maximum switching voltage: 30 VAC / 42 VDC

• Maximum switching current: 100 mA resistive

• Manufacturer cable length: 8 feet

Important: The 100 mA specification is the sensor output's maximum switching current, not the input current consumption. The output must be connected only to a compatible automatic door controller or properly rated input circuit.

Automatic Sliding Door Applications

The EAGLE ARTEK can be used as an activation sensor for compatible commercial automatic sliding entrances.

When a pedestrian approaches the door, the radar sensor detects movement and signals the door operator to initiate the opening sequence.

Typical Sliding Door Applications

• Single-slide automatic doors

• Bi-parting sliding doors

• Commercial storefront entrances

• Hospital sliding doors

• Retail and office entrances

• Automatic sliding door retrofit projects

Confirm the existing operator's electrical input requirements and any necessary interface equipment.

Automatic Swinging & Revolving Door Applications

The 10EAGLEARTEK is also suitable for compatible automatic swinging and revolving entrance systems.

Its compact design, adjustable radar field, and direction-sensing capabilities provide flexibility for installations requiring controlled approach activation.

Typical Applications

• Automatic single swinging doors

• Simultaneous swinging door pairs

• Commercial revolving doors

• Automatic entrance modernization

• Commercial automatic door service and replacement

Important: The EAGLE ARTEK provides motion activation. The completed door must also have all required presence sensors, safety sensors, controls, and other protective devices.

Replacement for Older BEA EAGLE Sensors

The EAGLE ARTEK is the newer compact radar activation sensor intended to support replacement of the previous BEA EAGLE sensor family.

BEA designed the product with compatible mounting references and an optional plug-in retrofit interface to simplify many replacement installations.

Retrofit Benefits

• Updated compact sensor housing

• Electronic field adjustment

• Directional detection settings

• Cross-traffic filtering

• Push-button setup

• Available retrofit interface

• Replacement cover and mounting accessories

Retrofit Note: Verify electrical connections, mounting holes, interface requirements, and controller compatibility before replacing an existing BEA EAGLE sensor. A matching mounting pattern does not guarantee a direct electrical substitution.

Product Specifications

Dimensional Note: These are physical sensor dimensions, not packaged shipping dimensions.

Compatible BEA Accessories

BEA offers mounting and replacement accessories for the EAGLE ARTEK family.

Accessory Note: Some mounting accessories, replacement covers, or power supplies may be required depending on the installation. They are not automatically included with the sensor.

Recommended Commercial Applications

The BEA 10EAGLEARTEK is suitable for compatible automatic pedestrian entrances in:

• Commercial office buildings

• Hospitals and healthcare facilities

• Assisted living facilities

• Retail stores and shopping malls

• Airports and transportation terminals

• Hotels and hospitality facilities

• Schools and universities

• Government and municipal buildings

• Commercial storefront entrances

• Automatic sliding door systems

• Automatic swinging door systems

• Commercial revolving door entrances

• Automatic door repair and maintenance projects

• Commercial entrance retrofit installations

Installation & Ordering Considerations

Before ordering, verify the existing automatic door system and installation requirements.

Installation Checklist

• Confirm manufacturer part number 10EAGLEARTEK.

• Verify that a microwave motion activation sensor is required.

• Confirm automatic door operator compatibility.

• Check available 12–24V AC/DC power.

• Verify solid-state relay output compatibility.

• Confirm mounting height and header conditions.

• Select the appropriate detection field size and shape.

• Configure directional sensing and cross-traffic filtering.

• Verify the appropriate radar mounting angle.

• Determine whether a mounting bracket or spacer is required.

• Confirm whether the 10EARETROFIT interface is necessary.

• Use the BEA remote or onboard controls for programming.

• Test sensor activation at all intended approach paths.

• Verify that passing cross traffic does not cause unwanted activation.

• Test the complete automatic door safety system after installation.

Safety Notice: The BEA 10EAGLEARTEK is an activation sensor. It does not replace dedicated automatic door presence or safety sensors required for the opening.

Package Information

Product Configuration

• BEA 10EAGLEARTEK EAGLE ARTEK Microwave Motion Sensor

• Compact ABS Sensor Housing

• Integrated Radar Detection Electronics

• Push-Button Programming Interface

• Manufacturer-Specified Sensor Cable

Accessories Generally Sold Separately

• BEA 10REMOTE programming remote

• BEA 10EARA rain accessory

• BEA 10EACA / 10EACA-BLK ceiling accessories

• BEA 10EABA mounting bracket

• BEA 10EARETROFIT interface

• BEA 10EAGLEARTEKSPACER

• Compatible power supply

• Additional automatic door safety sensors

Verify the exact mounting screws, cable connectors, and supplied installation components with the distributor before ordering.

Why Choose the BEA 10EAGLEARTEK?

The BEA 10EAGLEARTEK EAGLE ARTEK Microwave Motion Sensor combines compact design, advanced radar activation, electronic field adjustment, and directional motion filtering in one commercial automatic door sensor.

With its 24.15 GHz microwave technology, 12–24V AC/DC operation, low power consumption, and flexible mounting options, the EAGLE ARTEK is designed to deliver reliable activation while helping reduce unnecessary automatic door cycles.

Whether replacing an older BEA EAGLE sensor or outfitting a new commercial automatic entrance, the BEA EAGLE ARTEK offers a practical, professional-grade activation solution for commercial automatic door systems.