Commercial Automatic Door Activation | 36" x 6" Full-Surface Push Plate | Hardwired or 300/433/900 MHz Wireless | Wall or Bollard Mount

The BEA 10LPR36 Series Low-Profile Automatic Door Push Plate is a heavy-duty, full-length activation device designed to provide convenient, accessible operation of commercial automatic pedestrian doors.

Featuring an extended 36-inch high/low activation surface, the BEA LPR36 allows users to activate an automatic door from virtually any point along the plate. Its full-length design helps accommodate wheelchair users, individuals using walkers, and pedestrians with limited mobility without requiring separate high and low activation switches.

Constructed with a durable 304 stainless steel faceplate, extruded aluminum base, and four highly sensitive membrane switches, the BEA 10LPR36 delivers dependable activation in demanding commercial and institutional environments.

The low-profile design projects approximately 1 inch from the mounting surface, helping reduce accidental impacts and damage in high-traffic areas.

Available in hardwired, 300 MHz wireless, 433 MHz wireless, and 900 MHz wireless configurations, the LPR36 provides flexible installation options for new construction, automatic door retrofits, and accessibility improvements.

Customers can select either PUSH TO OPEN text with accessibility symbols or accessibility symbols only.

Key Features & Benefits

Full-Length 36" High/Low Activation

• Large 36" x 6" active surface.

• Provides 216 square inches of activation area.

• Allows activation at different heights along the plate.

• Designed for users with limited mobility.

• Can eliminate the need for two separate high and low push plates in qualifying applications.

• Ideal for accessible commercial entrances.

Four Highly Sensitive Membrane Switches

• Incorporates four redundant membrane switches.

• Enables activation across the entire push plate surface.

• Requires minimal pressure to activate.

• Provides dependable operation in high-traffic facilities.

• Uses a normally open electrical contact configuration.

Low-Profile Commercial Design

• Approximately 1-inch-deep profile.

• Helps minimize protrusion into pedestrian traffic areas.

• Reduces the risk of accidental impact.

• Clean, professional appearance for modern commercial entrances.

• Suitable for wall-mounted and compatible bollard-mounted installations.

Heavy-Duty Stainless Steel Construction

• 304 stainless steel activation faceplate.

• Durable 6063 aluminum base.

• Nylon 66 internal switch actuator.

• UL94 ABS plastic end caps.

• Stainless steel mounting hardware.

• Designed for long-term commercial use.

Hardwired & Wireless Options

• Hardwired versions available for direct connection to compatible door controls.

• Wireless versions available in 300 MHz, 433 MHz, and 900 MHz.

• Wireless models feature integrated transmitters.

• Matching wireless receivers are required and sold separately.

• Suitable for retrofit projects where additional control wiring may be impractical.

Accessible Automatic Door Operation

• Designed to support accessible pedestrian entrance applications.

• Provides a large, easy-to-identify activation area.

• Available with recessed blue accessibility symbols.

• Suitable for low-energy and other compatible automatic door systems.

• Designed with reference to applicable ANSI automatic door standards and California Building Code requirements.

Available Models & Variants

PUSH TO OPEN Text & Accessibility Symbols

Accessibility Symbols Only

Ordering Note: Select the correct activation type and faceplate marking. Wireless versions must be matched with a compatible receiver operating on the same frequency.

Technical Specifications

How the BEA 10LPR36 Works

Step 1 – Pedestrian Activation

A pedestrian presses anywhere along the 36-inch activation surface.

Step 2 – Membrane Switch Activation

One or more of the integrated membrane switches detects pressure and generates an activation signal.

Step 3 – Signal Transmission

Depending on the selected model:

• Hardwired models send an electrical signal directly to compatible door controls.

• Wireless models transmit a radio-frequency signal to an appropriately matched BEA receiver.

Step 4 – Automatic Door Operation

The automatic door controller receives the signal and activates the connected door operator according to its programmed sequence.

Step 5 – Door Closing

The automatic door closes according to the operator's settings and properly installed safety devices.

Compatible BEA Accessories

Recommended Applications

The BEA 10LPR36 Series is designed for commercial automatic pedestrian doors in:

• Hospitals and healthcare facilities

• Assisted living and senior living communities

• Schools, colleges, and universities

• Government and municipal buildings

• Airports and transportation terminals

• Shopping malls and retail storefronts

• Commercial office buildings

• Hotels and hospitality facilities

• Industrial and manufacturing facilities

• Public-access automatic entrances

• Automatic swinging doors

• Automatic sliding doors

• Revolving door activation applications

• Accessibility improvement and retrofit projects

Installation & Compatibility Information

The BEA 10LPR36 is designed to mount directly to compatible wall surfaces or appropriately configured bollard posts.

Installation Requirements:

1. Select the appropriate hardwired or wireless model.

2. Determine the proper mounting position based on the entrance layout and applicable accessibility requirements.

3. Secure the mounting assembly to a suitable structural surface.

4. Connect the hardwired switch or install and configure the wireless transmitter as applicable.

5. Connect the activation signal to the automatic door control system.

6. Test full-surface activation and proper automatic door operation.

Important Installation Notes:

• Wireless models require a compatible receiver, sold separately.

• Automatic door operators are not included.

• Mounting bollards and conversion kits are sold separately.

• Connect the switching circuit only to a compatible, power-limited Class 2 control circuit.

• BEA does not recommend installation where the plate is directly exposed to water, including unprotected outdoor locations.

• Verify applicable building, electrical, accessibility, and automatic door safety requirements before installation.

Why Choose the BEA 10LPR36 Series?

The BEA 10LPR36 Full-Length High/Low Automatic Door Push Plate offers an effective solution for commercial facilities requiring accessible automatic door activation.

Its large stainless steel activation surface provides convenient operation at multiple heights, while the four sensitive membrane switches help ensure activation across the entire faceplate.

With multiple wireless frequency options, hardwired availability, and flexible wall or bollard mounting, the LPR36 is a versatile choice for commercial door contractors, automatic door technicians, architects, and facility maintenance professionals.

Upgrade your automatic entrance with the BEA 10LPR36 Series – a heavy-duty, low-profile, full-length activation plate designed for accessibility and commercial reliability.