Camden CM-RFK45/A4 Kinetic by Camden™ 900 MHz Wireless Push-Plate Activation Kit is a complete no-battery automatic-door activation system with two 4-1/2-inch square PUSH TO OPEN push plates, two surface-mount boxes, and one single-relay wireless receiver. The switches feature the active wheelchair symbol and satin stainless steel (630/US32D) finish, making them well suited for accessible commercial entry doors and retrofits.

The Kinetic transmitter harvests energy from the physical press of the push plate, eliminating switch batteries and the need to run activation wiring to each switch location. The included receiver is wired to a compatible automatic door operator or access-control circuit and provides relay activation when a plate is pressed. This is a touch-activated, battery-free wireless push-plate kit, not a hands-free proximity sensor or automatic door operator.

Key Features & Benefits

• Self-powered kinetic push plates: Pressing each push plate generates the small amount of energy required to transmit the wireless activation signal; the push plates require no battery replacement.
• Two-point activation kit: Two matching push plates provide door activation from both sides of a compatible automatic doorway.
• 900 MHz wireless system: Kinetic by Camden radio technology eliminates the need to pull control wiring from each push plate back to the door operator.
• Accessible switch design: 4-1/2-inch square tactile push plates display the active wheelchair symbol and the words PUSH TO OPEN; manufacturer identifies an activation force of less than 3.4 lb.
• Satin stainless steel appearance: 630/US32D faceplate finish coordinates with standard commercial door hardware and stands up to frequent use.
• Complete mounting package: Includes two corresponding surface-mount boxes for placing switches at accessible locations on properly prepared surfaces.
• Single-relay receiver: One receiver accepts the wireless activation signal and provides a Form C/SPDT relay output to a compatible door operator or controller.
• Adjustable receiver timing: Camden's Kinetic receiver design supports selectable relay operation, operating time and delayed output for properly specified applications.
• Extended radio coverage: Camden publishes up to 300 ft open-air range and up to 70 ft when the receiver is installed in an operator header; actual range depends on site conditions.
• Reduced maintenance: No switch batteries reduce routine replacement and disposal associated with conventional battery-powered transmitters.

Included Components

Technical Specifications

Commercial Applications

Ideal for automatic swing-door activation at accessible building entrances, medical facilities, assisted-living communities, schools, municipal buildings, offices, retail stores, and other high-use commercial doorways. Useful in retrofit installations where running control wiring to both activation plates is difficult or costly. Controls must be paired with compatible door operators and required safety systems.

Ordering & Installation Notes

Confirm the receiver operating voltage, compatible door-operator activation input, relay action, switch location and signal range before ordering. The push plates are battery-free, but the receiver still requires low-voltage power and wired output connections. This kit does not include an automatic door operator, access-control controller, electric lock, power supply for the receiver, or door safety sensors. Verify any required weatherproof push-plate option for direct exterior exposure, and follow current Camden instructions and all applicable accessibility, fire/egress, and electrical requirements.

Commercial Door Worx supplies Camden automatic-door activation kits, advanced controllers, electrified door hardware, and commercial access-control parts for contractors, facility technicians, and door installers.

Kinetic Wireless Kit Selection Guide

The Camden CM-RFK45/A4 Kinetic Wireless ADA Door Activation Kit is a battery-free push-plate package for compatible low-energy and automatic commercial door systems. Each of the two included push plates uses kinetic energy generated by the press to transmit the actuation signal. This distinguishes the Kinetic system from Camden's separate battery-powered Lazerpoint 915 MHz wireless activation kits.

What the Selected Kit Provides

• Two 4-1/2-inch commercial PUSH TO OPEN plates: Satin stainless-steel finish, accessible wheelchair markings and durable commercial actuation hardware.
• Wireless activation: The plate/transmitter assembly communicates using the kit's specified 900 MHz Kinetic radio system.
• Two mounting boxes: Suitable surface boxes for the specified push-plate installation.
• One compatible receiver: Provides an interface for an approved automatic door operator's activation circuit.
• Battery-free plate operation: No periodic transmitter-battery replacement is needed at the push plates.

Professional Installation Checklist

1. Confirm the operator is compatible with the receiver's relay output and operating voltage.
2. Choose push-plate locations and mounting heights that meet accessibility and site requirements.
3. Verify plate clearance, wall construction and the included surface box placement.
4. Pair and test the two activation points with the receiver according to Camden's Kinetic instructions.
5. Test radio reception under actual steel-frame, concrete, wall and interference conditions.
6. Confirm door safety sensors, operator controls and all required accessible opening functions are operating correctly.

Scope: The specified wireless activation kit does not include a complete automatic swing-door operator, door, safety sensors or third-party controller unless expressly listed.