Camden CX-ED2079 – Universal Low-Profile Electric Strike is a commercial electric door strike designed for compatible cylindrical locksets and properly prepared hollow-metal or wood door frames. This Camden low-profile model accommodates a 1/2" to 5/8" latchbolt throw and includes three stainless steel faceplates, giving installers several options for retrofit and new-installation applications. Its 12/24V AC/DC input and selectable fail-safe/fail-secure function make it practical for integration with compatible intercoms, access-control panels, card readers and release buttons.

The CX-ED2079 is a lower-profile and lighter-duty strike than the CX-ED1079 family: its published static strength is 1,000 lb versus 1,500 lb for the CX-ED1079. Camden's product literature calls this a Grade 2 strike family while also stating the CX-ED2079 series is ANSI/BHMA A156.31 Grade 1 certified. Use the model-specific documentation when specifying certifications.

Key Features & Benefits

• Centerline latch-entry design: Suitable for properly matched cylindrical locksets with 1/2 to 5/8 in latch projection.
• Three stainless steel faceplates included: CX-ESP1B ANSI square, CX-ESP3B hollow metal, and CX-ESP4B wood-frame faceplates provide three mounting options.
• Dual-voltage wiring: Field-selectable 12/24V AC/DC operation; power connectors for each voltage are included.
• Configurable failure mode: Selectable fail-safe or fail-secure operation for the applicable access-control design.
• Low-profile keeper assembly: 4-7/8 in high x 1-7/8 in wide x 1-7/32 in deep body with horizontal adjustment.
• Strength and durability: 1,000 lb static strength, 50 ft-lb dynamic strength, 700,000 factory-tested cycles and 500,000 UL-verified cycles.
• Continuous duty: Suitable for compatible continuously energized DC access-control circuits.
• Compliance: Camden identifies the CX-ED2079 series as ANSI/BHMA A156.31 Grade 1 certified and UL 1034/UL 294 listed, though its product family is marketed as a low-profile Grade 2 strike.
• Non-handed design: Compatible with properly specified left- and right-hand doors.
• Power behavior: AC operation produces an audible buzz; DC operation is silent.

Technical Specifications

Commercial Applications

Recommended for properly engineered commercial access-control installations, including offices, retail facilities, institutional buildings, service doors, tenant entrances and other security-controlled doors where a door-frame strike can release the door's compatible mechanical latch on command. Works with correctly specified access-control panels, intercom relays, readers, keypads and release-control equipment.

Installation and Ordering Notes

The CX-ED2079 is a cylindrical-latch electric strike, not a mortise latch/deadbolt strike or an electric strike specifically intended for rim panic device latches. Check the mechanical lockset, latch projection, frame preparation and required faceplate. Does not provide dedicated latchbolt monitoring; verify a monitored model if feedback is required. Confirm electrical ratings, mounting space, door handing, mechanical latch alignment and all building, accessibility, electrical and fire/egress code requirements. Follow the current Camden installation instructions and ensure installation by qualified personnel. The mechanical lockset, access controller, card reader, power supply, cabling and other accessories are not included unless separately specified.

Commercial Door Worx supplies Camden electric strikes, magnetic locks, access-control components and commercial door hardware for contractors and facility-maintenance professionals.

Low Profile Strike: Installation Checklist

The CX-ED2079 low-profile universal electric strike is intended for compatible cylindrical latches at commercial doors where a smaller strike body and supplied faceplate choices simplify retrofit installation.

• Measure the latch: Verify a compatible 1/2-inch to 5/8-inch latchbolt projection and that the latch aligns centrally with the strike keeper.
• Choose the appropriate faceplate: Use one of the three included stainless-steel faceplates to match the existing frame preparation as permitted by Camden's installation instructions.
• Plan power and control: Confirm a compatible 12/24V AC/DC supply, proper field-selectable fail-safe or fail-secure mode, door-release relay and wiring.
• Check the entire opening: Verify door handing, frame clearance, latch function, door closer adjustment and permitted emergency egress.
• Inspect existing fire labeling: Select fire-listed strike hardware if required; installation into a rated opening is not automatically approved merely because the strike is Grade 1.

Typical Applications and Scope of Supply

Used on professionally specified office doors, employee entrances, medical facilities, schools and commercial service openings using compatible cylindrical latchsets. Supplied is the CX-ED2079 electric strike with three matching faceplates; separate readers, locks, access controllers and power supplies must be selected for the opening.