The Camden Lazerpoint 915 MHz Wireless ADA Door Activation Kit provides two-point wireless push-plate activation for compatible automatic commercial door operators. Choose the package with the desired push plates and surface mounting boxes.

Available Kit Models

• CM-RFL454-SA: Two CM-45/4 4-1/2-inch square PUSH TO OPEN plates, two standard-depth CM-43CBL surface boxes, two CM-TX-9 transmitters and one CM-RX-90 receiver.
• CM-RFL454-LPA: Two CM-45/4 4-1/2-inch square plates, two low-profile CM-43LP shallow surface boxes, two CM-TX-9 transmitters and one CM-RX-90 receiver.
• CM-RFL464-SA: Two CM-46/4 stainless-steel exposed-screw 4-1/2-inch plates with standard CM-43CBL surface boxes, two CM-TX-9 transmitters and one CM-RX-90 receiver.

Features and Ordering Notes

• Lazerpoint 915 MHz RF communication between the wireless push-plate transmitters and wired receiver.
• Two-location PUSH TO OPEN operation with wheelchair-accessibility markings.
• Professional automatic-door operator integration; the receiver requires appropriate low-voltage supply and wiring to the operator.

The separate Camden Kinetic CM-RFK45/A4 system is not a variant of this Lazerpoint kit and is listed separately. Confirm enclosure depth, plate mounting, compatibility and site-specific wireless range before purchase. Model variants carry their own prices, SKUs and shipping weights.

Model Comparison and Kit Contents

All three models use Camden Lazerpoint 915 MHz RF wireless control to activate a compatible automatic door operator from two locations. Each kit consists of two ADA-marked push plates, compatible wireless surface mounting boxes, two wall-switch transmitters and one compatible Lazerpoint single-relay receiver. The plate mounting and enclosure depth vary by ordered kit.

Key Features and Benefits

• RF technology: 915 MHz Camden Lazerpoint spread-spectrum wireless transmission, reducing the need to route signal wiring from each activation switch to the operator.
• Two activation locations: Useful for mounting accessible PUSH TO OPEN plates on both sides of a compatible automatic entrance.
• Complete activation package: Two activating plates, two compatible wall-switch transmitters, two mounting boxes and one receiver are provided in the selected kit configuration.
• Professional automatic-door integration: Receiver provides a wired relay output to the existing door operator's authorized activation input.
• Architectural selection: Choose standard-depth boxes, low-profile boxes or exposed-screw stainless-steel plates depending on mounting clearance and durability needs.
• Commercial installation: Appropriate for offices, medical facilities, assisted living, shopping centers, public-building entrances and facility replacement work.

Technical and Ordering Information

Which Kit Is Best for Your Opening?

• RFL454-SA: Standard mounting depth for typical wall/column surface-box space.
• RFL454-LPA: Shallow box installation where a lower-profile plate enclosure is desired.
• RFL464-SA: Exposed-screw plates when accessible fastening is preferred for installation or service.

Installer Checklist

1. Confirm the selected 4-1/2 in plates and surface boxes will mount properly on the wall, mullion or column.
2. Verify the operator accepts the receiver relay output and has a suitable low-voltage supply.
3. Confirm radio range and signal reception at the job site; walls, steel frames and interference affect performance.
4. Program the push-plate transmitters to the receiver and test operation from both sides of the opening.
5. Follow the door operator manufacturer's accessibility, opening-force, safety and presence-sensor requirements.

Important: These are Lazerpoint 915 MHz wireless push-plate kits, not the separately sold battery-free Kinetic CM-RFK45/A4 package. A complete operator, presence sensors and other installation hardware are sold separately unless explicitly specified.