{"product_id":"command-access-request-to-exit-switch-kit-motorized-jackson-kawneer-aht-exit-devices","title":"Command Access Request-to-Exit Switch Kit | Motorized Jackson, Kawneer \u0026 AHT Exit Devices","description":"\u003cp\u003eAdd monitored exit signaling to an approved motorized panic device with the \u003cstrong\u003eCommand Access Technologies PD15REXKIT-M-ED Field-Installable Request-to-Exit (REX) Switch Kit\u003c\/strong\u003e. This hardware-specific retrofit accessory is designed for \u003cstrong\u003eCommand Access motorized exit-device configurations\u003c\/strong\u003e, including the \u003cstrong\u003eMLRK1-JAC12 Jackson\/Kawneer latch-retraction family\u003c\/strong\u003e and compatible \u003cstrong\u003ePD15\/PD16, AHT 8000\/9000, Jackson 1285\/1295 and Kawneer 1686\/1786\u003c\/strong\u003e applications as defined in the manufacturer's current compatibility documentation.\u003c\/p\u003e\u003ch3\u003eMotorized Exit-Device REX Selection\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003ePD15REXKIT-M-ED\u003c\/strong\u003e is specifically identified for compatible \u003cstrong\u003emotorized\u003c\/strong\u003e exit-device platforms, including select Jackson, Kawneer and AHT applications. Do not interchange it with a REX kit intended only for mechanical or solenoid-driven hardware.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore ordering:\u003c\/strong\u003e Record the host device’s complete model and retrofit motor kit, then verify current compatibility documentation and wiring harness revision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal function:\u003c\/strong\u003e Use the REX contact to report an inside exit actuation to the access controller; confirm dry-contact type and allowable electrical load per manufacturer instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField testing:\u003c\/strong\u003e Verify motor actuation and latch retraction separately from REX monitoring, including the correct control-panel signal during manual egress.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe switch detects compatible exit-device pushpad operation and provides an electrical signal to a connected access-control or security input. This makes it possible to recognize an egress event, coordinate approved door alarm behavior, or log use of the interior panic bar. \u003cstrong\u003ePD15REXKIT-M-ED is a REX monitoring switch kit, not a motorized latch-retraction assembly, complete exit device or standalone access controller.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for motorized exit-device applications:\u003c\/strong\u003e The \u003cstrong\u003e-M-ED\u003c\/strong\u003e designation identifies the field-installable REX option intended for Command Access motorized conversions. Choose this version rather than the standard \u003cstrong\u003ePD15REXKIT-ED\u003c\/strong\u003e mechanical-device kit when the manufacturer specifies the motorized configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJackson and Kawneer compatibility:\u003c\/strong\u003e Listed as a field REX upgrade for \u003cstrong\u003eMLRK1-JAC12\u003c\/strong\u003e motorized latch retraction, covering approved Jackson and Kawneer exit-device applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroader compatible motorized platforms:\u003c\/strong\u003e Supplier references identify Command Access motorized \u003cstrong\u003ePD15\/16, AHT 8\/9 and Jackson 1285\/1295\u003c\/strong\u003e exit devices. Check the precise model and electrification type before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated pushpad monitoring:\u003c\/strong\u003e Switch changes state when the approved exit-device pushpad is operated, providing an egress indication to the associated security or access-control panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField-installable accessory:\u003c\/strong\u003e Allows the REX feature to be added to an existing compatible motorized device without ordering a complete replacement motor or panic bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry-contact request-to-exit concept:\u003c\/strong\u003e For connection to an appropriate monitored input. Confirm common\/normally-open\/normally-closed options, conductor identification, and electrical limits using the actual kit's wiring sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreserves normal mechanical egress:\u003c\/strong\u003e The exit device remains mechanically operable for code-compliant egress when the retrofit is installed and tested properly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial access-control applications:\u003c\/strong\u003e Useful for institutional, educational, healthcare, office and retail doors that already use a compatible Command Access motorized exit-device system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer-backed product family:\u003c\/strong\u003e Command Access publishes a limited three-year warranty on its exit-device switch kit family, subject to current factory terms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand \/ Manufacturer\u003c\/th\u003e\n\u003ctd\u003eCommand Access Technologies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer SKU\u003c\/th\u003e\n\u003ctd\u003ePD15REXKIT-M-ED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Category\u003c\/th\u003e\n\u003ctd\u003eField-installable request-to-exit switch kit \/ exit-device accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrimary Application\u003c\/th\u003e\n\u003ctd\u003eCompatible Command Access motorized exit-device applications, including MLRK1-JAC12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNamed Compatible Platforms\u003c\/th\u003e\n\u003ctd\u003eMotorized PD15\/16, AHT 8000\/9000, Jackson 1285\/1295 and compatible Kawneer series (verify precise model)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eJackson\/Kawneer Retrofit\u003c\/th\u003e\n\u003ctd\u003eMLRK1-JAC12 motorized latch retraction family\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSwitch Function\u003c\/th\u003e\n\u003ctd\u003eDetects activation of exit-device pushpad and reports a REX event\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation Type\u003c\/th\u003e\n\u003ctd\u003eField-installable internal switch accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSignal Output\u003c\/th\u003e\n\u003ctd\u003eSwitch contact to compatible access-control \/ security monitoring input; verify wiring instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eContact Rating\u003c\/th\u003e\n\u003ctd\u003eCheck the supplied motorized REX switch and current factory documentation; do not assume the rating of a different kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Voltage\u003c\/th\u003e\n\u003ctd\u003eREX is a switch accessory, not a standalone powered latch; its contact circuit is determined by the connected monitoring input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotorized Latch Retraction\u003c\/th\u003e\n\u003ctd\u003eNot included; compatible motorized device or MLRK1 conversion required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Control\u003c\/th\u003e\n\u003ctd\u003eProperly designed low-voltage access-control or monitored security input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eManufacturer's published three-year limited warranty for exit-device switch kits; current terms apply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping Weight\u003c\/th\u003e\n\u003ctd\u003e1 lb estimated packaged shipping weight; verify actual package before shipping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eMotorized vs. Mechanical REX Kits\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePD15REXKIT-M-ED\u003c\/strong\u003e is intended for a compatible \u003cstrong\u003emotorized\u003c\/strong\u003e Command Access exit-device retrofit and is the manufacturer-listed field option associated with \u003cstrong\u003eMLRK1-JAC12\u003c\/strong\u003e. The separately listed \u003cstrong\u003ePD15REXKIT-ED\u003c\/strong\u003e is a different field kit for appropriate \u003cstrong\u003emechanical\u003c\/strong\u003e exit-device configurations. The correct kit depends on the device's exact factory electrification, internal mechanism and motor\/solenoid retrofit. These kits should \u003cstrong\u003enot be treated as interchangeable\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eHow Request-to-Exit Monitoring Works\u003c\/h3\u003e\n\u003cp\u003eOn a compatible door, an occupant presses the exit-device pushpad to leave. The retrofit REX switch changes electrical contact state, allowing a connected controller to recognize that the device has been operated. Depending on programmed access-control logic, the panel can log the exit, coordinate a door-position alarm or temporarily suppress a forced-door indication. \u003cstrong\u003eThis switch does not itself retract the latch, energize the existing motor, unlock a door, provide a reader, or change the mechanical egress function.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eInstallation and Compatibility Checklist\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eIdentify the installed exit-device manufacturer, model series, length and \u003cstrong\u003emotorized\u003c\/strong\u003e electrification. Confirm that the proper field REX upgrade is the \u003cstrong\u003ePD15REXKIT-M-ED\u003c\/strong\u003e rather than the similarly named mechanical kit.\u003c\/li\u003e\n\u003cli\u003eVerify the current Command Access retrofit matrix for \u003cstrong\u003eMLRK1-JAC12\u003c\/strong\u003e, Jackson\/Kawneer and other compatible motorized devices. Do not assume that every device within a brand's product line is supported.\u003c\/li\u003e\n\u003cli\u003eReview the \u003cstrong\u003emanufacturer's specific PD15REXKIT-M-ED instructions\u003c\/strong\u003e for internal switch position, mounting components, wire routing and connector arrangement before modifying the panic device.\u003c\/li\u003e\n\u003cli\u003eMount the switch using the approved internal parts, ensuring the contact operates consistently with pushpad movement and does not obstruct the motorized latch retraction mechanism.\u003c\/li\u003e\n\u003cli\u003eConnect the switch conductors to the appropriate controller input, checking the contact diagram, current\/voltage rating and any NO\/NC requirements for the installed switch.\u003c\/li\u003e\n\u003cli\u003eTest the REX signal with the exit-device pushpad at rest and when pressed, and verify that motorized retraction, mechanical egress, latching and door-alarm coordination still function correctly.\u003c\/li\u003e\n\u003cli\u003eConfirm fire-rating, exit-device listing, emergency-egress and accessibility requirements for the complete opening before returning the door to service.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's Included and What's Not\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e One \u003cstrong\u003eCommand Access PD15REXKIT-M-ED\u003c\/strong\u003e field-installable request-to-exit switch kit intended for approved motorized exit-device applications. Verify the current factory packing list for the exact switch assembly, mounting fasteners, lead wires, labels and documentation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e The Jackson, Kawneer, AHT or PD15\/16 panic device; a separate MLRK1-JAC12 motorized latch-retraction kit; access controller, credential reader, power supply, door power-transfer hardware, door or frame. This product is a \u003cstrong\u003emonitoring accessory\u003c\/strong\u003e, not an entire electric door-locking system.\u003c\/p\u003e","brand":"Command Access Technologies","offers":[{"title":"Default Title","offer_id":68023195205847,"sku":"PD15REXKIT-M-ED","price":66.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4933\/1927\/files\/COM_REX-KIT_3b559db8-4bfb-4520-ae2b-cf26d26c2606.png?v=1794252413","url":"https:\/\/shop.commercialdoorworx.com\/products\/command-access-request-to-exit-switch-kit-motorized-jackson-kawneer-aht-exit-devices","provider":"Commercial Door Worx","version":"1.0","type":"link"}