Detex Advantex 10 Series Weatherized Alarmed Rim Exit Device — Cylinder Dogging, Stainless Steel

Protect exit openings while simplifying routine facility maintenance with the Detex Advantex 10 Series EB-W weatherized, battery-alarmed rim exit device. This factory configuration combines a rugged wide-stile rim panic device with an approximately 100 dB battery-powered exit alarm, key-operated cylinder dogging (CD), 99 surface strike, and 630 satin/brushed stainless steel finish (US32D). Choose the device for a 36-inch or 48-inch door and specify compatible outside trim separately if the opening requires exterior entry.

Designed for high-traffic commercial buildings, warehouse service doors, distribution facilities, retail back-of-house exits and qualifying weather-exposed openings, the EB-W configuration sounds an audible warning when someone operates the armed exit device. Free egress remains mechanically available when the door hardware is properly installed and operating; the alarm is intended to alert staff to exit use, not delay or prevent occupants from leaving.

Key Features and Facility Maintenance Benefits

• Approximately 100 dB integrated exit alarm: The weatherized EB-W function sounds an audible alert when the pushpad is operated while the alarm is armed, helping personnel identify unexpected exit activity.
• Standalone 9V battery-powered electronics: The EB-W alarm uses a standard 9V battery rather than requiring a dedicated building-power controller for ordinary standalone alarm operation. Confirm whether the battery cell is included in the factory carton before installation.
• Weatherized alarm protection: Detex specifies the weatherized assembly for exposure to rain and corrosive environments, with resistance testing based on MIL-STD 810F driving rain and salt fog methods. Install only within the manufacturer's approved conditions and do not treat weatherization as an unrestricted underwater or washdown rating.
• Key-controlled cylinder dogging: The CD option allows an authorized person to mechanically hold the pushpad retracted for an approved non-fire-rated opening. Detex describes a single cylinder used for arming, disarming and dogging functions in this EB-W family. Confirm the correct mortise cylinder/keying requirements separately.
• Audible and visual arming indication: Status indications help maintenance teams check whether the alarm is armed; the system also provides audible/visual low-battery notification for planned battery replacement.
• Remote bypass and remote signaling capabilities: Manufacturer-supported alarm connections can be integrated with a compatible remote monitoring or authorized-bypass arrangement. Confirm wiring, interface contacts and any required field accessories in Detex's current EB-W instructions.
• Stainless steel deadlocking latch: The heavy-duty Pullman-type latch bolt is designed for secure rim latching in high-use environments and operates with the included 99 surface-mounted strike configuration.
• 630 stainless appearance: The US32D / 630 brushed stainless steel finish coordinates with common institutional and commercial exit hardware.
• Wide-stile Advantex 10 construction: Heavy-duty exit hardware with weather-resistant components, 316 stainless steel fasteners, and a protective endcap that helps withstand high traffic and exposed openings.
• Non-handed, field-sizeable device: Suitable for manufacturer-approved left- or right-hand door applications, with factory instructions for proper sizing, secure mounting and strike alignment.
• Patented mounting/strike location system: Designed to help qualified installers position the device correctly during replacement or new construction, reducing guesswork at the door.
• Two standard opening widths: Order the 36-inch device for nominal 3-foot openings or the 48-inch device for nominal 4-foot openings; verify actual clearance, stile width and cutting limitations before installation.
• Device-only package: Outside pull/lever trim, entrance hardware, separate cylinders and other unrelated accessories are not included unless specifically confirmed in the factory package.

Choose the Correct Size

Product Specifications

What Each Model Code Means

• 10: Advantex 10 Series, wide-stile rim exit device
• EB: Battery-powered exit alarm
• W: Weatherized alarm/device configuration
• CD: Cylinder dogging
• 99: Surface-mounted rim strike
• 630: Satin/brushed stainless steel finish (US32D)
• 36 / 48: Device sized for nominal 36-inch or 48-inch-wide door

Designed for Commercial Facility Maintenance

For facility managers and maintenance technicians responsible for distribution centers, warehouses, retail exits, school service doors, commercial properties and other weather-exposed openings, this configuration combines mechanical emergency exit operation, alarmed exit monitoring and weather-resistant construction. The standardized 36-inch and 48-inch options help maintenance teams match existing hardware without inadvertently substituting a non-weatherized or non-alarmed rim device.

Before replacing an existing assembly, document the installed door width and thickness, handing, stile clearance, strike position, existing outside trim, cylinder keying, required signage and whether the opening is fire-rated. Compare the complete Detex model number; a mechanical 10 Series device, 10xW weatherized device, EA hardwired alarm, EB-W battery alarm and EE delayed-egress device are not interchangeable solely because they share the 10 Series name.

Package Scope — Device Only

One selected Detex Advantex 10 EB-W CD 99 rim exit device in 630 brushed stainless steel, sized for the selected 36- or 48-inch door, with the specified alarm and cylinder-dogging configuration and factory-standard components for the 99-strike installation. Outside trim, additional key cylinders, card readers, access-control power supplies, remote alarm panels, specialized mounting plates and unrelated replacement components are not included unless explicitly identified on the manufacturer's packing slip. Confirm the supplied 9V battery cell, mortise-cylinder provision, fasteners and any model-specific accessories before scheduling installation.

Shipping Information

36-inch variant: 25 lb. 48-inch variant: 28 lb. These are the existing Shopify shipping-weight settings and have not been independently verified against actual packaged manufacturer weights. Confirm packed carton length, width, height and billable weight with the supplier or warehouse before final UPS rates or shipping labels are issued. Do not use nominal door-device length as a substitute for the shipping carton dimensions.

Installation, Alarm Setup and Life Safety

Install the mechanical device and alarm using the current Detex Advantex 10xW installation instructions, EB-W alarm wiring and arming instructions, and the approved manufacturer door/strike templates. The 99 surface strike uses Detex's corresponding rim strike preparation; confirm opening dimensions and available reinforcement. After installation, test secure self-latching, full pushpad travel, unobstructed exit, correct alarm arming/disarming, battery alert, cylinder-dogging operation (where permitted), and any connected remote bypass or remote alarm signal. A qualified installer should verify that dogging is legally permitted at the specific opening. This product is not a delayed-egress lock; do not modify exit operation to obstruct evacuation or use it on a rated opening without confirmation of the exact listed fire-rated/less-dogging configuration and local authority approval.