The Detex Advantex 1003C CD 630 99 36 is a super-heavy-duty, ANSI/BHMA A156.3 Grade 1 wide-stile rim exit device for demanding commercial and institutional doors. This factory-specified assembly combines a 36-inch Advantex 10 Series panic bar, 03C night-latch straight pull trim for keyed outside entry, CD cylinder dogging, a 99 surface-mounted rim strike, and 630 / US32D satin stainless steel finish. Designed for properly prepared 3-foot commercial openings, it provides reliable mechanical free egress from the inside.

03C Night-Latch Pull Trim: The exterior 03C recessed straight pull permits an authorized keyholder to retract the rim latch with a key, then pull the door open. With the night-latch function, the outside trim does not act as an always-unlocked lever. Detex specifies a 1-1/8-inch rim cylinder, sold separately, for the 03C keyed exterior trim. The 03C trim plate is approximately 3 inches wide by 13-1/2 inches tall, with approximately 2-1/16-inch projection. Verify door preparation and cylinder tailpiece requirements against current Detex instructions.

CD Cylinder Dogging: An authorized person can mechanically dog the pushpad and latch retracted for approved free push/pull traffic using a compatible mortise dogging cylinder, sold separately. Two different cylinder types are involved: a rim cylinder for 03C outside trim and a mortise cylinder for CD dogging; specify required keys, cam/tailpiece and cylinder compatibility before ordering. Because this model allows mechanical dogging, it is a non-fire-rated panic hardware configuration and must not replace listed positive-latching fire exit hardware.

Features and Benefits

• Advantex 10 Series super-heavy-duty platform: Built for high-traffic, high-use and high-abuse commercial and institutional exit openings.
• ANSI/BHMA A156.3 Grade 1 performance: Detex's heavy-duty mechanical rim device is engineered to meet demanding panic-hardware requirements.
• 03C night-latch pull trim included: Brushed stainless exterior straight-pull plate with a cylinder hole for controlled key-operated outside entry.
• Key-retracts-latch outside function: Key control provides authorized entry while the interior panic hardware continues to allow free exit.
• CD cylinder-operated mechanical dogging: Holds the panic pushpad and rim latch retracted when permitted for the specific opening; dogging cylinder not included.
• 36-inch commercial door size: Nominal device length for compatible 3-foot-wide door openings; field-sizeable according to Detex installation instructions.
• 99 surface-mounted rim strike: Standard Detex strike for properly prepared single doors or approved center-mullion arrangements.
• 630 satin stainless steel finish: Durable US32D brushed stainless appearance coordinates with commercial architectural hardware.
• Deadlocking Pullman-style stainless latch: Provides dependable mechanical rim-latch engagement.
• Non-handed exit device: Suitable for appropriately prepared left- and right-hand doors.
• Patented mounting plate and strike locator: Helps align the exit bar and strike correctly for efficient installation.
• Heavy-duty angled end cap: Helps deflect impacts from carts and equipment at high-traffic openings.
• Compatible commercial door materials: Hollow metal, wood, aluminum and fiberglass when the opening and hardware preparations meet Detex requirements.
• Mechanical configuration: No electric alarm, electric latch retraction, request-to-exit wiring or delayed-egress locking is included.

Technical Specifications

Typical Applications

• Commercial office, educational, hospital and government openings with authorized key-operated outside entry
• Warehouses, industrial facilities and other high-traffic exits needing Grade 1 rim panic hardware
• 36-inch exterior or interior doors where a recessed pull and night-latch function are specified
• Approved non-fire-rated openings requiring cylinder-controlled dogging during normal business hours
• Single doors and pairs with correctly specified mullions, strikes and outside-trim preparations

What's Included

One Detex Advantex 10 Series 36-inch rim exit device with 03C exterior night-latch pull trim, CD mechanical cylinder dogging, 99 surface rim strike, 630 satin stainless steel finish, and manufacturer-standard mounting components. Confirm the current factory packing list prior to ordering.

Not Included

Rim cylinder for the 03C exterior pull and mortise cylinder for the CD dogging function are sold separately unless specifically ordered pre-installed. Door, frame, center mullion, exterior trim cylinders, specialty mounting accessories, additional lock hardware and professional installation are not included unless quoted.

Ordering and Installation Notes

Verify your complete model number: 1003C denotes the Detex 10 Series device with 03C keyed night-latch pull trim; CD denotes cylinder dogging; 630 is satin stainless finish; 99 is the surface strike; 36 is nominal device length in inches. This is not the 1001C blank exterior plate, 1002C dummy pull, 1003C EA alarmed device, 10 ER latch-retraction model or F1003C fire-rated model. Verify door width and thickness, handing, 03C rim-cylinder size, CD dogging mortise-cylinder and cam compatibility, keying, strike preparation, trim clearance, and egress/fire code requirements before purchase. Installation must follow current Detex instructions.

The Detex Advantex 1003C CD 630 99 48 is a super-heavy-duty, ANSI/BHMA A156.3 Grade 1 wide-stile rim exit device for demanding commercial and institutional doors. This factory-specified assembly combines a 48-inch Advantex 10 Series panic bar, 03C night-latch straight pull trim for keyed outside entry, CD cylinder dogging, a 99 surface-mounted rim strike, and 630 / US32D satin stainless steel finish. Designed for properly prepared 4-foot commercial openings, it provides reliable mechanical free egress from the inside.

03C Night-Latch Pull Trim: The exterior 03C recessed straight pull permits an authorized keyholder to retract the rim latch with a key, then pull the door open. With the night-latch function, the outside trim does not act as an always-unlocked lever. Detex specifies a 1-1/8-inch rim cylinder, sold separately, for the 03C keyed exterior trim. The 03C trim plate is approximately 3 inches wide by 13-1/2 inches tall, with approximately 2-1/16-inch projection. Verify door preparation and cylinder tailpiece requirements against current Detex instructions.

CD Cylinder Dogging: An authorized person can mechanically dog the pushpad and latch retracted for approved free push/pull traffic using a compatible mortise dogging cylinder, sold separately. Two different cylinder types are involved: a rim cylinder for 03C outside trim and a mortise cylinder for CD dogging; specify required keys, cam/tailpiece and cylinder compatibility before ordering. Because this model allows mechanical dogging, it is a non-fire-rated panic hardware configuration and must not replace listed positive-latching fire exit hardware.

Features and Benefits

• Advantex 10 Series super-heavy-duty platform: Built for high-traffic, high-use and high-abuse commercial and institutional exit openings.
• ANSI/BHMA A156.3 Grade 1 performance: Detex's heavy-duty mechanical rim device is engineered to meet demanding panic-hardware requirements.
• 03C night-latch pull trim included: Brushed stainless exterior straight-pull plate with a cylinder hole for controlled key-operated outside entry.
• Key-retracts-latch outside function: Key control provides authorized entry while the interior panic hardware continues to allow free exit.
• CD cylinder-operated mechanical dogging: Holds the panic pushpad and rim latch retracted when permitted for the specific opening; dogging cylinder not included.
• 48-inch commercial door size: Nominal device length for compatible 4-foot-wide door openings; field-sizeable according to Detex installation instructions.
• 99 surface-mounted rim strike: Standard Detex strike for properly prepared single doors or approved center-mullion arrangements.
• 630 satin stainless steel finish: Durable US32D brushed stainless appearance coordinates with commercial architectural hardware.
• Deadlocking Pullman-style stainless latch: Provides dependable mechanical rim-latch engagement.
• Non-handed exit device: Suitable for appropriately prepared left- and right-hand doors.
• Patented mounting plate and strike locator: Helps align the exit bar and strike correctly for efficient installation.
• Heavy-duty angled end cap: Helps deflect impacts from carts and equipment at high-traffic openings.
• Compatible commercial door materials: Hollow metal, wood, aluminum and fiberglass when the opening and hardware preparations meet Detex requirements.
• Mechanical configuration: No electric alarm, electric latch retraction, request-to-exit wiring or delayed-egress locking is included.

Technical Specifications

Typical Applications

• Commercial office, educational, hospital and government openings with authorized key-operated outside entry
• Warehouses, industrial facilities and other high-traffic exits needing Grade 1 rim panic hardware
• 48-inch exterior or interior doors where a recessed pull and night-latch function are specified
• Approved non-fire-rated openings requiring cylinder-controlled dogging during normal business hours
• Single doors and pairs with correctly specified mullions, strikes and outside-trim preparations

What's Included

One Detex Advantex 10 Series 48-inch rim exit device with 03C exterior night-latch pull trim, CD mechanical cylinder dogging, 99 surface rim strike, 630 satin stainless steel finish, and manufacturer-standard mounting components. Confirm the current factory packing list prior to ordering.

Not Included

Rim cylinder for the 03C exterior pull and mortise cylinder for the CD dogging function are sold separately unless specifically ordered pre-installed. Door, frame, center mullion, exterior trim cylinders, specialty mounting accessories, additional lock hardware and professional installation are not included unless quoted.

Ordering and Installation Notes

Verify your complete model number: 1003C denotes the Detex 10 Series device with 03C keyed night-latch pull trim; CD denotes cylinder dogging; 630 is satin stainless finish; 99 is the surface strike; 36 is nominal device length in inches. This is not the 1001C blank exterior plate, 1002C dummy pull, 1003C EA alarmed device, 10 ER latch-retraction model or F1003C fire-rated model. Verify door width and thickness, handing, 03C rim-cylinder size, CD dogging mortise-cylinder and cam compatibility, keying, strike preparation, trim clearance, and egress/fire code requirements before purchase. Installation must follow current Detex instructions.

The Detex Advantex 1003C ER EX 630 99 36 combines a heavy-duty 36-inch Grade 1 rim panic exit device with motorized electric latch retraction (ER), request-to-exit signaling (EX), and genuine 03C keyed night-latch straight-pull exterior trim. Configured with a 99 surface-mounted rim strike and 630 / US32D brushed stainless steel finish, this 10 Series assembly supports secure access-controlled entry and dependable mechanical free egress on compatible commercial and institutional doors.

ER – Electric Latch Retraction: A quiet 24VDC continuous-duty motor retracts the latchbolt and pushpad simultaneously when commanded by the compatible controller. Supports momentary release for credentialed access or automatic door operators and maintained retraction for remote electric dogging. Detex's ER arrangement is designed to avoid the high inrush and noise of conventional solenoid retraction. When control voltage is removed, normal mechanical latching resumes as designed for the approved opening.

EX – Request-to-Exit Signaling: The integrated EX low-current pushpad-actuation switch provides a dry-contact signal to a properly configured access-control or monitoring system, supporting exit-request detection and compatible alarm-shunt workflows. EX signaling does not mean an audible exit alarm, delayed egress, or electric unlocking outside trim is included.

03C Night-Latch Pull Trim: This key-retracts-latch 03C recessed straight pull provides key-controlled entry from the outside while maintaining free panic exit from inside. The exterior trim requires a compatible 1-1/8-inch rim cylinder, which is sold separately unless specifically included in the factory package. The 03C pull plate is approximately 3 inches wide by 13-1/2 inches high, projecting approximately 2-1/16 inches; confirm the exact trim template and cylinder tailpiece.

Important configuration check: The distributor link for this item contains ER CD in its URL although the displayed item title identifies ER EX, and the distributor's option fields also refer to cylinder dogging. This draft is listed as the ER EX model requested. Mechanical CD cylinder dogging is not confirmed as part of the exact factory build; do not assume a separate dogging cylinder is included or required until Detex or the supplier confirms the original order code. Motor-driven electric dogging is an ER function and is distinct from mechanical CD dogging.

Key Features and Benefits

• Detex Advantex 10 Series: Super-heavy-duty wide-stile rim panic hardware designed for high-use and high-abuse commercial exits.
• Grade 1 mechanical egress: ANSI/BHMA A156.3 Grade 1 hardware for demanding institutional and commercial openings.
• 36-inch size: Nominal panic device for compatible 3-foot-wide door openings; confirm approved field sizing and door preparations.
• ER motorized electric latch retraction: Simultaneously retracts the latchbolt and pushpad for remote access, automatic operator integration and electric dogging.
• Continuous-duty motor: Quiet 24VDC operation with low current demand and no high-inrush solenoid.
• Momentary or maintained release: Supports momentary authorized access and sustained electric latch retraction through appropriate controls.
• EX pushpad switch: Low-current request-to-exit output for compatible security, access control and monitoring systems.
• 03C night-latch pull included: Brushed stainless key-retracting exterior straight-pull trim for outside access by authorized personnel.
• Separate outside-entry cylinder: 03C trim requires a compatible rim cylinder, sold separately unless factory supplied.
• 99 surface strike: Specified Detex 99 rim strike for correctly prepared door and frame or approved mullion.
• 630 satin stainless steel: Architectural US32D brushed stainless finish to coordinate with matching commercial hardware.
• Stainless steel deadlocking Pullman latch: Dependable, positive mechanical latching for the exit device.
• Non-handed device: Supports correctly prepared left- and right-hand commercial openings.
• Patented mounting plate and strike locator: Assist alignment and installation of the Advantex exit hardware.
• Power/controller sold separately: Appropriate regulated 24VDC Detex ER controller and power supply are required for electrical operation.
• Non-weatherized, non-fire-rated configuration: Not a weatherized ER EX W device or a specifically listed F1003C fire-exit model.
• Manufacturer warranty: Detex limited 10-year mechanical and 3-year electrical warranty, subject to current terms.

Technical Specifications

Commercial Applications

• Access-controlled 36-inch hollow metal or other properly prepared commercial doors
• Automatic door operators where a motor-driven latch release is required before door opening
• Hospitals, schools, government buildings, corporate offices, warehouses and institutional facilities
• Remote unlock, scheduled electric dogging and secure exit monitoring applications
• Single doors or pairs with properly selected Detex controllers, strikes and mullions

Included in the Exit Device Assembly

One Detex Advantex 1003C ER EX 630 99 36 36-inch rim exit device with motorized ER latch-retraction option, EX request-to-exit switch, 03C exterior night-latch pull trim, standard 99 surface strike, 630 satin stainless finish and factory-standard mounting materials. Confirm the exact wiring package and any mechanical cylinder dogging with the distributor before purchase.

Not Included Unless Factory Specified

Detex ER logic controller/power supply (81-800, 82-800 or 83-800), external power supply equipment, separate rim cylinder for 03C trim, any mechanical dogging cylinder, any special power-transfer hardware not included in the specific factory configuration, doors, frames, mullions, field wiring and installation services. Check the precise supplied connector and power transfer details against the manufacturer packing list.

Installation and Ordering Notes

Confirm the ordered ER EX versus ER CD suffix with SECLOCK/Detex because the distributor's URL and product title differ. Verify 03C outside trim and keying, rim cylinder requirements, 99 strike position, door thickness and stile, required 24VDC power/controller capacity, voltage drop, request-to-exit wiring, power transfer, and local egress and fire-door requirements. Do not publish this draft as a confirmed mechanical cylinder-dogging model without supplier verification. The ER motorized release does not change the requirement for unobstructed mechanical emergency egress.

The Detex Advantex 1003C HD 630 99 48 combines super-heavy-duty ANSI/BHMA A156.3 Grade 1 rim panic exit hardware with 03C night-latch pull trim for keyed exterior entry and HD hex-key dogging for authorized push/pull operation. Built for compatible 48-inch / 4-foot commercial door openings, the assembly includes the 99 surface-mounted rim strike and durable 630 / US32D satin stainless steel finish. This non-electrified exit device maintains convenient free mechanical egress from the inside.

03C Night-Latch Pull Trim: The included exterior 03C recessed straight-pull plate allows an authorized keyholder to retract the rim latch and pull the door open. The night-latch outside trim does not provide an always-unlocked lever. A compatible 1-1/8-inch rim cylinder is required for the 03C pull trim and is sold separately unless specifically included on the supplier order. The trim plate is approximately 3 inches wide by 13-1/2 inches high, with approximately 2-1/16-inch projection. Verify current Detex cylinder/tailpiece and door preparation instructions.

HD Hex Dogging: A standard 1/8-turn hex-key dogging mechanism allows authorized personnel to hold the pushpad and latchbolt retracted for normal free-passage operation where dogging is permitted. No dogging mortise cylinder is needed for this HD configuration—unlike the separate CD cylinder-dogging model. The rim cylinder for the 03C night-latch trim is still required for keyed exterior entry. Because this HD configuration has mechanical dogging, it is not fire-rated as ordered and must not be used as a substitute for listed fire-exit hardware requiring positive latching.

Key Features & Benefits

• Detex Advantex 10 Series: Super-heavy-duty wide-stile panic exit hardware for high-use commercial, industrial and institutional doors.
• ANSI/BHMA Grade 1: Designed for demanding opening cycles and reliable mechanical exit operation.
• 48-inch nominal device: Intended for compatible 4-foot-wide openings; field sizing must follow current manufacturer instructions.
• 03C exterior night-latch pull included: Recessed stainless straight pull with keyed latch-retracting access; a rim cylinder is required and sold separately.
• HD hex-key dogging: Authorized mechanical dogging holds the pushpad and latch retracted for normal push/pull traffic where allowed.
• No separate dogging cylinder: Hex dogging uses its designated key/actuator; the rim cylinder serves the 03C outside trim only.
• Detex No. 99 surface rim strike: Standard strike for correctly prepared single-door or approved paired-door mullion applications.
• 630 / US32D finish: Brushed satin stainless steel appearance coordinates with commercial hinges, pull trim and protection plates.
• Deadlocking Pullman-type latchbolt: Stainless steel mechanical latch supports dependable positive latching when not dogged.
• Non-handed construction: Mounts on appropriate right- or left-hand reverse swing doors, subject to the correct trim installation and door preparation.
• Patented mounting plate and strike locator: Detex's alignment system simplifies installation and helps reduce rework.
• Heavy-duty ramped end cap: Helps deflect incidental damage from carts and equipment in busy facilities.
• Door applications: For properly prepared commercial hollow metal, wood, aluminum or fiberglass doors meeting manufacturer requirements.
• Mechanical hardware only: No EA exit alarm, EE delayed egress, EX request-to-exit signaling, ER electric latch retraction or electrical power supply.
• Manufacturer warranty: Covered by Detex limited mechanical warranty according to current applicable terms.

Technical Specifications

Typical Applications

• 48-inch commercial entry and exit doors needing keyed outside access with free mechanical egress
• Office, healthcare, education, government, industrial, institutional and retail facilities
• Non-fire-rated openings allowing mechanical dogging during normal staffed hours
• High-traffic hollow-metal and other compatible prepared doors where commercial Grade 1 panic hardware is specified
• Single doors and compatible paired-door openings with the correct mullion and strike arrangement

What's Included

One Detex Advantex 10 Series 48-inch rim exit device with HD mechanical hex dogging, matching 03C exterior night-latch recessed pull trim, No. 99 surface rim strike, 630 satin stainless finish, and manufacturer-standard mounting components. Factory package contents should be verified before ordering.

Not Included

The 1-1/8-inch rim cylinder for 03C outside trim is not included unless explicitly specified. A separate CD-style mortise dogging cylinder is not needed for this hex-dogging model. Door, frame, center mullion, specialty fasteners, additional trim/cylinders, access-control components, and installation services are not included unless quoted.

Installation & Ordering Notes

Confirm the complete suffix before purchasing: 1003C = Detex 10 Series with keyed 03C night-latch pull; HD = hex dogging; 630 = satin stainless finish; 99 = surface strike; 48 = nominal 48-inch device length. Do not confuse this model with 1003C CD cylinder dogging, 1003C EA alarmed versions, 1003C ER EX electric latch retraction or F1003C fire-rated hardware. Check rim cylinder preparation, handed door conditions, minimum stile, length, strike/trim alignment, and applicable egress/fire-door codes. Follow Detex installation instructions and use a qualified commercial door-hardware installer.