{"product_id":"detex-advantex-1003c-rim-exit-device-36-in-night-latch-pull-cylinder-dogging-630","title":"Detex Advantex 1003C Rim Exit Device | Pull Trim \u0026 Options","description":"\u003cp\u003eThe \u003cstrong\u003eDetex ADVANTEX 1003C\u003c\/strong\u003e factory exit-device family combines a compatible 10 Series rim panic device with the \u003cstrong\u003e03C keyed night-latch pull trim\u003c\/strong\u003e. Available configurations differ by device length and factory function: \u003cstrong\u003eCD cylinder dogging\u003c\/strong\u003e, \u003cstrong\u003eHD hex dogging\u003c\/strong\u003e or \u003cstrong\u003eER\/EX electrified\u003c\/strong\u003e features as identified by the complete SKU. Do not substitute the electrified version for a mechanical one without verifying power, wiring, access control and the current factory installation instructions.\u003c\/p\u003e\u003csection\u003e\u003ch3\u003eChoose the 1003C Night-Latch Pull and Exit-Device Function\u003c\/h3\u003e\n\u003cp\u003eDetex \u003cstrong\u003e1003C\u003c\/strong\u003e combines the Advantex rim panic device with the keyed \u003cstrong\u003e03C night-latch pull\u003c\/strong\u003e. The exterior trim permits an authorized key to retract the latch for entry on properly configured openings, while the inside pushpad provides mechanical egress. The keyed outside trim is not a substitute for the selected dogging or ER\/EX electrical features.\u003c\/p\u003e\n\u003ch4\u003eHow These Four Factory Versions Differ\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 in \/ CD:\u003c\/strong\u003e Cylinder dogging for authorized latch hold-open during permitted operating hours, with the 03C keyed exterior pull.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48 in \/ CD:\u003c\/strong\u003e Same general mechanical cylinder-dogging and keyed pull function in the factory 48-inch device length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 in \/ ER\/EX:\u003c\/strong\u003e Motor-driven electric latch\/pushpad retraction and request-to-exit signaling. An approved power supply\/controller and door-to-frame wiring transfer must be specified separately unless included by the complete factory package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48 in \/ HD:\u003c\/strong\u003e Mechanical hex dogging for approved daytime push\/pull operation with the exterior night-latch pull.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCylinders, Keying and Outside Trim\u003c\/h4\u003e\n\u003cp\u003eCheck the manufacturer-required \u003cstrong\u003erim cylinder for the 03C exterior keyed function\u003c\/strong\u003e separately from any \u003cstrong\u003emortise cylinder used for CD dogging\u003c\/strong\u003e. Two key-operated functions may require different hardware preparations; do not assume one cylinder or keying option automatically serves both. Confirm trim finish, door thickness, exterior mounting holes and the 99 rim-strike template with the current Detex documentation.\u003c\/p\u003e\n\u003ch4\u003eFor the ER\/EX Electrical Version\u003c\/h4\u003e\n\u003cp\u003eER provides powered retraction for authorized access or automatic-operator coordination. EX reports inside exit actuation to compatible controls; it is not inherently a door-position or latch-status sensor. Verify the correct control voltage, duty cycle, conductor capacity, output interface and mechanical exit behavior with the approved system design.\u003c\/p\u003e\n\u003ch4\u003eTypical Uses\u003c\/h4\u003e\n\u003cp\u003eCommercial doors needing keyed exterior access and panic egress, school and institutional corridors with authorized trim access, business-hours dogging where permitted, or access-controlled openings using the correctly configured ER\/EX option.\u003c\/p\u003e\u003c\/section\u003e\u003ch3\u003eFactory SKUs and Available Configurations\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVariant\u003c\/th\u003e\n\u003cth\u003eExact SKU\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e36 in — Cylinder Dogging\u003c\/td\u003e\n\u003ctd\u003eDTX-1003C-CD-630-99-36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e48 in — Cylinder Dogging\u003c\/td\u003e\n\u003ctd\u003eDTX-1003C-CD-630-99-48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e36 in — ER\/EX Electrified\u003c\/td\u003e\n\u003ctd\u003eDTX-1003C-ER-EX-630-99-36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e48 in — Hex Dogging\u003c\/td\u003e\n\u003ctd\u003eDTX-1003C-HD-630-99-48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eKey Selection and Installation Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGenuine Detex Advantex commercial-grade rim exit hardware for approved high-use openings.\u003c\/li\u003e\n\u003cli\u003eFactory 630 \/ US32D satin stainless steel finish and compatible 99 surface strike on the listed variants.\u003c\/li\u003e\n\u003cli\u003eChoose the exact factory configuration, not only nominal size: CD, HD, LD, or ER\/EX differ in mechanical and\/or electrical function.\u003c\/li\u003e\n\u003cli\u003eWhere specified, night-latch pull trim must match the device family and project keying scheme; required cylinders and keys may be ordered separately.\u003c\/li\u003e\n\u003cli\u003eBefore ordering, verify door width, latch\/strike preparation, hand, trim type, intended opening function, any electrical supply, and compatible fire-exit listing requirements.\u003c\/li\u003e\n\u003cli\u003eAfter installation, test free mechanical egress, full positive latch engagement, any authorized dogging function and appropriate access-control\/alarm signals if equipped.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded Components\u003c\/h3\u003e\u003cp\u003eOne selected Detex rim exit-device configuration with specified factory 99 strike, trim, dogging or electrified accessories as listed in its model documentation. Verify exact factory package contents. Door, frame, unrelated accessories, extra cylinders, separately required power controls and field installation are not included unless indicated by the selected SKU.\u003c\/p\u003e\u003ch3\u003eOriginal Detailed Model Specifications\u003c\/h3\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003e36 in — Cylinder Dogging — DTX-1003C-CD-630-99-36\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eThe \u003cstrong\u003eDetex Advantex 1003C CD 630 99 36\u003c\/strong\u003e is a super-heavy-duty, \u003cstrong\u003eANSI\/BHMA A156.3 Grade 1 wide-stile rim exit device\u003c\/strong\u003e for demanding commercial and institutional doors. This factory-specified assembly combines a \u003cstrong\u003e36-inch Advantex 10 Series panic bar\u003c\/strong\u003e, \u003cstrong\u003e03C night-latch straight pull trim\u003c\/strong\u003e for keyed outside entry, \u003cstrong\u003eCD cylinder dogging\u003c\/strong\u003e, a \u003cstrong\u003e99 surface-mounted rim strike\u003c\/strong\u003e, and \u003cstrong\u003e630 \/ US32D satin stainless steel\u003c\/strong\u003e finish. Designed for properly prepared 3-foot commercial openings, it provides reliable mechanical free egress from the inside.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e03C Night-Latch Pull Trim:\u003c\/strong\u003e The exterior \u003cstrong\u003e03C recessed straight pull\u003c\/strong\u003e permits an authorized keyholder to \u003cstrong\u003eretract the rim latch with a key\u003c\/strong\u003e, then pull the door open. With the night-latch function, the outside trim does not act as an always-unlocked lever. Detex specifies a \u003cstrong\u003e1-1\/8-inch rim cylinder, sold separately\u003c\/strong\u003e, for the 03C keyed exterior trim. The 03C trim plate is approximately \u003cstrong\u003e3 inches wide by 13-1\/2 inches tall\u003c\/strong\u003e, with approximately \u003cstrong\u003e2-1\/16-inch projection\u003c\/strong\u003e. Verify door preparation and cylinder tailpiece requirements against current Detex instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCD Cylinder Dogging:\u003c\/strong\u003e An authorized person can mechanically dog the pushpad and latch retracted for approved free push\/pull traffic using a \u003cstrong\u003ecompatible mortise dogging cylinder, sold separately\u003c\/strong\u003e. \u003cstrong\u003eTwo different cylinder types are involved:\u003c\/strong\u003e a \u003cstrong\u003erim cylinder for 03C outside trim\u003c\/strong\u003e and a \u003cstrong\u003emortise cylinder for CD dogging\u003c\/strong\u003e; specify required keys, cam\/tailpiece and cylinder compatibility before ordering. Because this model allows mechanical dogging, it is a \u003cstrong\u003enon-fire-rated panic hardware configuration\u003c\/strong\u003e and must not replace listed positive-latching fire exit hardware.\u003c\/p\u003e\n\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvantex 10 Series super-heavy-duty platform:\u003c\/strong\u003e Built for high-traffic, high-use and high-abuse commercial and institutional exit openings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI\/BHMA A156.3 Grade 1 performance:\u003c\/strong\u003e Detex's heavy-duty mechanical rim device is engineered to meet demanding panic-hardware requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e03C night-latch pull trim included:\u003c\/strong\u003e Brushed stainless exterior straight-pull plate with a cylinder hole for controlled key-operated outside entry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey-retracts-latch outside function:\u003c\/strong\u003e Key control provides authorized entry while the interior panic hardware continues to allow free exit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCD cylinder-operated mechanical dogging:\u003c\/strong\u003e Holds the panic pushpad and rim latch retracted when permitted for the specific opening; dogging cylinder not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36-inch commercial door size:\u003c\/strong\u003e Nominal device length for compatible 3-foot-wide door openings; field-sizeable according to Detex installation instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e99 surface-mounted rim strike:\u003c\/strong\u003e Standard Detex strike for properly prepared single doors or approved center-mullion arrangements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e630 satin stainless steel finish:\u003c\/strong\u003e Durable US32D brushed stainless appearance coordinates with commercial architectural hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeadlocking Pullman-style stainless latch:\u003c\/strong\u003e Provides dependable mechanical rim-latch engagement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-handed exit device:\u003c\/strong\u003e Suitable for appropriately prepared left- and right-hand doors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented mounting plate and strike locator:\u003c\/strong\u003e Helps align the exit bar and strike correctly for efficient installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty angled end cap:\u003c\/strong\u003e Helps deflect impacts from carts and equipment at high-traffic openings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible commercial door materials:\u003c\/strong\u003e Hollow metal, wood, aluminum and fiberglass when the opening and hardware preparations meet Detex requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical configuration:\u003c\/strong\u003e No electric alarm, electric latch retraction, request-to-exit wiring or delayed-egress locking is included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eDetex Corporation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eAdvantex 10 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Model\u003c\/th\u003e\n\u003ctd\u003e1003C CD 630 99 36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShopify SKU\u003c\/th\u003e\n\u003ctd\u003eDTX-1003C-CD-630-99-36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWide-stile Grade 1 rim panic exit device with outside night-latch pull trim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Device Length\u003c\/th\u003e\n\u003ctd\u003e36 inches, for compatible 36-inch \/ 3-foot door openings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside Trim \/ Function\u003c\/th\u003e\n\u003ctd\u003e03C – night-latch recessed straight pull; authorized key retracts the latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside Trim Plate Dimensions\u003c\/th\u003e\n\u003ctd\u003e3 in W × 13-1\/2 in H; projection approx. 2-1\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e03C Exterior Cylinder\u003c\/th\u003e\n\u003ctd\u003e1-1\/8-inch rim cylinder required; sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDogging Function\u003c\/th\u003e\n\u003ctd\u003eCD – key-operated mechanical cylinder dogging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCD Dogging Cylinder\u003c\/th\u003e\n\u003ctd\u003eCompatible mortise cylinder required; sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCylinder Type Note\u003c\/th\u003e\n\u003ctd\u003e03C uses a rim cylinder; CD uses a separate mortise cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrike\u003c\/th\u003e\n\u003ctd\u003eDetex No. 99 surface-mounted rim strike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003e630 \/ US32D – satin\/brushed stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLatch\u003c\/th\u003e\n\u003ctd\u003eStainless steel deadlocking Pullman-type rim latchbolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHanding\u003c\/th\u003e\n\u003ctd\u003eNon-handed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard Door Thickness\u003c\/th\u003e\n\u003ctd\u003e1-3\/4 in to 2-1\/4 in; verify specific opening requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Door Stile with 99 Strike\u003c\/th\u003e\n\u003ctd\u003e4-5\/8 in, subject to current manufacturer template\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical Grade\u003c\/th\u003e\n\u003ctd\u003eANSI\/BHMA A156.3 Grade 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFire-Rated Configuration\u003c\/th\u003e\n\u003ctd\u003eNo – mechanical cylinder-dogging model is not fire-rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical Features\u003c\/th\u003e\n\u003ctd\u003eNone; mechanical night-latch exterior trim and mechanical cylinder dogging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping Weight\u003c\/th\u003e\n\u003ctd\u003e22 lb estimated; verify actual packaged weight including pull trim before fulfillment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical Warranty\u003c\/th\u003e\n\u003ctd\u003eSubject to Detex's current limited warranty terms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCommercial office, educational, hospital and government openings with authorized key-operated outside entry\u003c\/li\u003e\n\u003cli\u003eWarehouses, industrial facilities and other high-traffic exits needing Grade 1 rim panic hardware\u003c\/li\u003e\n\u003cli\u003e36-inch exterior or interior doors where a recessed pull and night-latch function are specified\u003c\/li\u003e\n\u003cli\u003eApproved non-fire-rated openings requiring cylinder-controlled dogging during normal business hours\u003c\/li\u003e\n\u003cli\u003eSingle doors and pairs with correctly specified mullions, strikes and outside-trim preparations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne \u003cstrong\u003eDetex Advantex 10 Series 36-inch rim exit device\u003c\/strong\u003e with \u003cstrong\u003e03C exterior night-latch pull trim\u003c\/strong\u003e, \u003cstrong\u003eCD mechanical cylinder dogging\u003c\/strong\u003e, \u003cstrong\u003e99 surface rim strike\u003c\/strong\u003e, \u003cstrong\u003e630 satin stainless steel finish\u003c\/strong\u003e, and manufacturer-standard mounting components. Confirm the current factory packing list prior to ordering.\u003c\/p\u003e\n\u003ch3\u003eNot Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRim cylinder for the 03C exterior pull and mortise cylinder for the CD dogging function are sold separately\u003c\/strong\u003e unless specifically ordered pre-installed. Door, frame, center mullion, exterior trim cylinders, specialty mounting accessories, additional lock hardware and professional installation are not included unless quoted.\u003c\/p\u003e\n\u003ch3\u003eOrdering and Installation Notes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eVerify your complete model number:\u003c\/strong\u003e \u003cstrong\u003e1003C\u003c\/strong\u003e denotes the Detex 10 Series device with 03C keyed night-latch pull trim; \u003cstrong\u003eCD\u003c\/strong\u003e denotes cylinder dogging; \u003cstrong\u003e630\u003c\/strong\u003e is satin stainless finish; \u003cstrong\u003e99\u003c\/strong\u003e is the surface strike; \u003cstrong\u003e36\u003c\/strong\u003e is nominal device length in inches. This is \u003cstrong\u003enot\u003c\/strong\u003e the 1001C blank exterior plate, 1002C dummy pull, 1003C EA alarmed device, 10 ER latch-retraction model or F1003C fire-rated model. Verify door width and thickness, handing, 03C rim-cylinder size, CD dogging mortise-cylinder and cam compatibility, keying, strike preparation, trim clearance, and egress\/fire code requirements before purchase. Installation must follow current Detex instructions.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003e48 in — Cylinder Dogging — DTX-1003C-CD-630-99-48\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eThe \u003cstrong\u003eDetex Advantex 1003C CD 630 99 48\u003c\/strong\u003e is a super-heavy-duty, \u003cstrong\u003eANSI\/BHMA A156.3 Grade 1 wide-stile rim exit device\u003c\/strong\u003e for demanding commercial and institutional doors. This factory-specified assembly combines a \u003cstrong\u003e48-inch Advantex 10 Series panic bar\u003c\/strong\u003e, \u003cstrong\u003e03C night-latch straight pull trim\u003c\/strong\u003e for keyed outside entry, \u003cstrong\u003eCD cylinder dogging\u003c\/strong\u003e, a \u003cstrong\u003e99 surface-mounted rim strike\u003c\/strong\u003e, and \u003cstrong\u003e630 \/ US32D satin stainless steel\u003c\/strong\u003e finish. Designed for properly prepared 4-foot commercial openings, it provides reliable mechanical free egress from the inside.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e03C Night-Latch Pull Trim:\u003c\/strong\u003e The exterior \u003cstrong\u003e03C recessed straight pull\u003c\/strong\u003e permits an authorized keyholder to \u003cstrong\u003eretract the rim latch with a key\u003c\/strong\u003e, then pull the door open. With the night-latch function, the outside trim does not act as an always-unlocked lever. Detex specifies a \u003cstrong\u003e1-1\/8-inch rim cylinder, sold separately\u003c\/strong\u003e, for the 03C keyed exterior trim. The 03C trim plate is approximately \u003cstrong\u003e3 inches wide by 13-1\/2 inches tall\u003c\/strong\u003e, with approximately \u003cstrong\u003e2-1\/16-inch projection\u003c\/strong\u003e. Verify door preparation and cylinder tailpiece requirements against current Detex instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCD Cylinder Dogging:\u003c\/strong\u003e An authorized person can mechanically dog the pushpad and latch retracted for approved free push\/pull traffic using a \u003cstrong\u003ecompatible mortise dogging cylinder, sold separately\u003c\/strong\u003e. \u003cstrong\u003eTwo different cylinder types are involved:\u003c\/strong\u003e a \u003cstrong\u003erim cylinder for 03C outside trim\u003c\/strong\u003e and a \u003cstrong\u003emortise cylinder for CD dogging\u003c\/strong\u003e; specify required keys, cam\/tailpiece and cylinder compatibility before ordering. Because this model allows mechanical dogging, it is a \u003cstrong\u003enon-fire-rated panic hardware configuration\u003c\/strong\u003e and must not replace listed positive-latching fire exit hardware.\u003c\/p\u003e\n\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvantex 10 Series super-heavy-duty platform:\u003c\/strong\u003e Built for high-traffic, high-use and high-abuse commercial and institutional exit openings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI\/BHMA A156.3 Grade 1 performance:\u003c\/strong\u003e Detex's heavy-duty mechanical rim device is engineered to meet demanding panic-hardware requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e03C night-latch pull trim included:\u003c\/strong\u003e Brushed stainless exterior straight-pull plate with a cylinder hole for controlled key-operated outside entry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKey-retracts-latch outside function:\u003c\/strong\u003e Key control provides authorized entry while the interior panic hardware continues to allow free exit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCD cylinder-operated mechanical dogging:\u003c\/strong\u003e Holds the panic pushpad and rim latch retracted when permitted for the specific opening; dogging cylinder not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48-inch commercial door size:\u003c\/strong\u003e Nominal device length for compatible 4-foot-wide door openings; field-sizeable according to Detex installation instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e99 surface-mounted rim strike:\u003c\/strong\u003e Standard Detex strike for properly prepared single doors or approved center-mullion arrangements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e630 satin stainless steel finish:\u003c\/strong\u003e Durable US32D brushed stainless appearance coordinates with commercial architectural hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeadlocking Pullman-style stainless latch:\u003c\/strong\u003e Provides dependable mechanical rim-latch engagement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-handed exit device:\u003c\/strong\u003e Suitable for appropriately prepared left- and right-hand doors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented mounting plate and strike locator:\u003c\/strong\u003e Helps align the exit bar and strike correctly for efficient installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty angled end cap:\u003c\/strong\u003e Helps deflect impacts from carts and equipment at high-traffic openings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible commercial door materials:\u003c\/strong\u003e Hollow metal, wood, aluminum and fiberglass when the opening and hardware preparations meet Detex requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical configuration:\u003c\/strong\u003e No electric alarm, electric latch retraction, request-to-exit wiring or delayed-egress locking is included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eDetex Corporation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eAdvantex 10 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Model\u003c\/th\u003e\n\u003ctd\u003e1003C CD 630 99 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShopify SKU\u003c\/th\u003e\n\u003ctd\u003eDTX-1003C-CD-630-99-48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWide-stile Grade 1 rim panic exit device with outside night-latch pull trim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Device Length\u003c\/th\u003e\n\u003ctd\u003e48 inches, for compatible 48-inch \/ 4-foot door openings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside Trim \/ Function\u003c\/th\u003e\n\u003ctd\u003e03C – night-latch recessed straight pull; authorized key retracts the latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside Trim Plate Dimensions\u003c\/th\u003e\n\u003ctd\u003e3 in W × 13-1\/2 in H; projection approx. 2-1\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e03C Exterior Cylinder\u003c\/th\u003e\n\u003ctd\u003e1-1\/8-inch rim cylinder required; sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDogging Function\u003c\/th\u003e\n\u003ctd\u003eCD – key-operated mechanical cylinder dogging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCD Dogging Cylinder\u003c\/th\u003e\n\u003ctd\u003eCompatible mortise cylinder required; sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCylinder Type Note\u003c\/th\u003e\n\u003ctd\u003e03C uses a rim cylinder; CD uses a separate mortise cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrike\u003c\/th\u003e\n\u003ctd\u003eDetex No. 99 surface-mounted rim strike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003e630 \/ US32D – satin\/brushed stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLatch\u003c\/th\u003e\n\u003ctd\u003eStainless steel deadlocking Pullman-type rim latchbolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHanding\u003c\/th\u003e\n\u003ctd\u003eNon-handed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard Door Thickness\u003c\/th\u003e\n\u003ctd\u003e1-3\/4 in to 2-1\/4 in; verify specific opening requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Door Stile with 99 Strike\u003c\/th\u003e\n\u003ctd\u003e4-5\/8 in, subject to current manufacturer template\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical Grade\u003c\/th\u003e\n\u003ctd\u003eANSI\/BHMA A156.3 Grade 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFire-Rated Configuration\u003c\/th\u003e\n\u003ctd\u003eNo – mechanical cylinder-dogging model is not fire-rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical Features\u003c\/th\u003e\n\u003ctd\u003eNone; mechanical night-latch exterior trim and mechanical cylinder dogging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping Weight\u003c\/th\u003e\n\u003ctd\u003e24 lb estimated; verify actual packaged weight including pull trim before fulfillment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical Warranty\u003c\/th\u003e\n\u003ctd\u003eSubject to Detex's current limited warranty terms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCommercial office, educational, hospital and government openings with authorized key-operated outside entry\u003c\/li\u003e\n\u003cli\u003eWarehouses, industrial facilities and other high-traffic exits needing Grade 1 rim panic hardware\u003c\/li\u003e\n\u003cli\u003e48-inch exterior or interior doors where a recessed pull and night-latch function are specified\u003c\/li\u003e\n\u003cli\u003eApproved non-fire-rated openings requiring cylinder-controlled dogging during normal business hours\u003c\/li\u003e\n\u003cli\u003eSingle doors and pairs with correctly specified mullions, strikes and outside-trim preparations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne \u003cstrong\u003eDetex Advantex 10 Series 48-inch rim exit device\u003c\/strong\u003e with \u003cstrong\u003e03C exterior night-latch pull trim\u003c\/strong\u003e, \u003cstrong\u003eCD mechanical cylinder dogging\u003c\/strong\u003e, \u003cstrong\u003e99 surface rim strike\u003c\/strong\u003e, \u003cstrong\u003e630 satin stainless steel finish\u003c\/strong\u003e, and manufacturer-standard mounting components. Confirm the current factory packing list prior to ordering.\u003c\/p\u003e\n\u003ch3\u003eNot Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRim cylinder for the 03C exterior pull and mortise cylinder for the CD dogging function are sold separately\u003c\/strong\u003e unless specifically ordered pre-installed. Door, frame, center mullion, exterior trim cylinders, specialty mounting accessories, additional lock hardware and professional installation are not included unless quoted.\u003c\/p\u003e\n\u003ch3\u003eOrdering and Installation Notes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eVerify your complete model number:\u003c\/strong\u003e \u003cstrong\u003e1003C\u003c\/strong\u003e denotes the Detex 10 Series device with 03C keyed night-latch pull trim; \u003cstrong\u003eCD\u003c\/strong\u003e denotes cylinder dogging; \u003cstrong\u003e630\u003c\/strong\u003e is satin stainless finish; \u003cstrong\u003e99\u003c\/strong\u003e is the surface strike; \u003cstrong\u003e36\u003c\/strong\u003e is nominal device length in inches. This is \u003cstrong\u003enot\u003c\/strong\u003e the 1001C blank exterior plate, 1002C dummy pull, 1003C EA alarmed device, 10 ER latch-retraction model or F1003C fire-rated model. Verify door width and thickness, handing, 03C rim-cylinder size, CD dogging mortise-cylinder and cam compatibility, keying, strike preparation, trim clearance, and egress\/fire code requirements before purchase. Installation must follow current Detex instructions.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003e36 in — ER\/EX Electrified — DTX-1003C-ER-EX-630-99-36\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eThe \u003cstrong\u003eDetex Advantex 1003C ER EX 630 99 36\u003c\/strong\u003e combines a heavy-duty \u003cstrong\u003e36-inch Grade 1 rim panic exit device\u003c\/strong\u003e with \u003cstrong\u003emotorized electric latch retraction (ER)\u003c\/strong\u003e, \u003cstrong\u003erequest-to-exit signaling (EX)\u003c\/strong\u003e, and genuine \u003cstrong\u003e03C keyed night-latch straight-pull exterior trim\u003c\/strong\u003e. Configured with a \u003cstrong\u003e99 surface-mounted rim strike\u003c\/strong\u003e and \u003cstrong\u003e630 \/ US32D brushed stainless steel finish\u003c\/strong\u003e, this 10 Series assembly supports secure access-controlled entry and dependable mechanical free egress on compatible commercial and institutional doors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eER – Electric Latch Retraction:\u003c\/strong\u003e A quiet \u003cstrong\u003e24VDC continuous-duty motor\u003c\/strong\u003e retracts the latchbolt and pushpad simultaneously when commanded by the compatible controller. Supports momentary release for credentialed access or automatic door operators and maintained retraction for remote electric dogging. Detex's ER arrangement is designed to avoid the high inrush and noise of conventional solenoid retraction. When control voltage is removed, normal mechanical latching resumes as designed for the approved opening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEX – Request-to-Exit Signaling:\u003c\/strong\u003e The integrated \u003cstrong\u003eEX low-current pushpad-actuation switch\u003c\/strong\u003e provides a dry-contact signal to a properly configured access-control or monitoring system, supporting exit-request detection and compatible alarm-shunt workflows. EX signaling does \u003cstrong\u003enot\u003c\/strong\u003e mean an audible exit alarm, delayed egress, or electric unlocking outside trim is included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e03C Night-Latch Pull Trim:\u003c\/strong\u003e This \u003cstrong\u003ekey-retracts-latch 03C recessed straight pull\u003c\/strong\u003e provides key-controlled entry from the outside while maintaining free panic exit from inside. The exterior trim requires a \u003cstrong\u003ecompatible 1-1\/8-inch rim cylinder\u003c\/strong\u003e, which is \u003cstrong\u003esold separately\u003c\/strong\u003e unless specifically included in the factory package. The 03C pull plate is approximately 3 inches wide by 13-1\/2 inches high, projecting approximately 2-1\/16 inches; confirm the exact trim template and cylinder tailpiece.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant configuration check:\u003c\/strong\u003e The distributor link for this item contains \u003cem\u003eER CD\u003c\/em\u003e in its URL although the displayed item title identifies \u003cem\u003eER EX\u003c\/em\u003e, and the distributor's option fields also refer to cylinder dogging. This draft is listed as the \u003cstrong\u003eER EX model requested\u003c\/strong\u003e. \u003cstrong\u003eMechanical CD cylinder dogging is not confirmed as part of the exact factory build\u003c\/strong\u003e; do not assume a separate dogging cylinder is included or required until Detex or the supplier confirms the original order code. Motor-driven electric dogging is an ER function and is distinct from mechanical CD dogging.\u003c\/p\u003e\n\u003ch3\u003eKey Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetex Advantex 10 Series:\u003c\/strong\u003e Super-heavy-duty wide-stile rim panic hardware designed for high-use and high-abuse commercial exits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade 1 mechanical egress:\u003c\/strong\u003e ANSI\/BHMA A156.3 Grade 1 hardware for demanding institutional and commercial openings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36-inch size:\u003c\/strong\u003e Nominal panic device for compatible 3-foot-wide door openings; confirm approved field sizing and door preparations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eER motorized electric latch retraction:\u003c\/strong\u003e Simultaneously retracts the latchbolt and pushpad for remote access, automatic operator integration and electric dogging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous-duty motor:\u003c\/strong\u003e Quiet 24VDC operation with low current demand and no high-inrush solenoid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMomentary or maintained release:\u003c\/strong\u003e Supports momentary authorized access and sustained electric latch retraction through appropriate controls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEX pushpad switch:\u003c\/strong\u003e Low-current request-to-exit output for compatible security, access control and monitoring systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e03C night-latch pull included:\u003c\/strong\u003e Brushed stainless key-retracting exterior straight-pull trim for outside access by authorized personnel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate outside-entry cylinder:\u003c\/strong\u003e 03C trim requires a compatible rim cylinder, sold separately unless factory supplied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e99 surface strike:\u003c\/strong\u003e Specified Detex 99 rim strike for correctly prepared door and frame or approved mullion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e630 satin stainless steel:\u003c\/strong\u003e Architectural US32D brushed stainless finish to coordinate with matching commercial hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel deadlocking Pullman latch:\u003c\/strong\u003e Dependable, positive mechanical latching for the exit device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-handed device:\u003c\/strong\u003e Supports correctly prepared left- and right-hand commercial openings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented mounting plate and strike locator:\u003c\/strong\u003e Assist alignment and installation of the Advantex exit hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\/controller sold separately:\u003c\/strong\u003e Appropriate regulated 24VDC Detex ER controller and power supply are required for electrical operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-weatherized, non-fire-rated configuration:\u003c\/strong\u003e Not a weatherized ER EX W device or a specifically listed F1003C fire-exit model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer warranty:\u003c\/strong\u003e Detex limited 10-year mechanical and 3-year electrical warranty, subject to current terms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eDetex Corporation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Series\u003c\/th\u003e\n\u003ctd\u003eAdvantex 10 Series, wide-stile rim exit hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Model for This Listing\u003c\/th\u003e\n\u003ctd\u003e1003C ER EX 630 99 36 (supplier URL references ER CD – confirm before release)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShopify SKU\u003c\/th\u003e\n\u003ctd\u003eDTX-1003C-ER-EX-630-99-36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDevice Size\u003c\/th\u003e\n\u003ctd\u003e36 in nominal, for properly prepared 36-inch \/ 3-foot doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical Function ER\u003c\/th\u003e\n\u003ctd\u003eMotor-driven electric latch and pushpad retraction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical Function EX\u003c\/th\u003e\n\u003ctd\u003eIntegrated request-to-exit switch, dry-contact signaling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical Supply\u003c\/th\u003e\n\u003ctd\u003e24VDC regulated supply\/controller, required and sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eER Operating Current\u003c\/th\u003e\n\u003ctd\u003eApprox. 1A for retraction; 0.18A maintaining retraction per Detex specification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eController \/ Power Options\u003c\/th\u003e\n\u003ctd\u003eDetex 81-800 single door; 82-800 pair; 83-800 independent pair (select by application)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Supply Included?\u003c\/th\u003e\n\u003ctd\u003eNo – compatible ER logic controller and supply required separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside Trim\u003c\/th\u003e\n\u003ctd\u003e03C – keyed night-latch recessed straight-pull trim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e03C Entry Function\u003c\/th\u003e\n\u003ctd\u003eAuthorized key retracts latch for outside entry; no active lever\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e03C Required Cylinder\u003c\/th\u003e\n\u003ctd\u003eCompatible 1-1\/8-in rim cylinder; sold separately unless explicitly factory-furnished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanical Cylinder Dogging\u003c\/th\u003e\n\u003ctd\u003eNot confirmed: distributor URL says ER CD, while displayed item name says ER EX; verify original build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRemote Electric Dogging\u003c\/th\u003e\n\u003ctd\u003eAvailable through ER maintained electric retraction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrike\u003c\/th\u003e\n\u003ctd\u003eDetex No. 99 surface-mounted rim strike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003e630 \/ US32D satin \/ brushed stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLatch\u003c\/th\u003e\n\u003ctd\u003eDeadlocking stainless steel Pullman-type rim latchbolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHanding\u003c\/th\u003e\n\u003ctd\u003eNon-handed mechanical exit device; verify outside trim preparation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDoor Thickness\u003c\/th\u003e\n\u003ctd\u003eStandard compatible commercial 1-3\/4 to 2-1\/4-inch doors; verify special openings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardware Grade\u003c\/th\u003e\n\u003ctd\u003eANSI\/BHMA A156.3 Grade 1 mechanical panic hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFire Rated\u003c\/th\u003e\n\u003ctd\u003eNo – standard non-fire-rated rim panic device unless separately listed fire model is ordered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeatherization\u003c\/th\u003e\n\u003ctd\u003eNo – standard ER EX model, not ER EX W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExit Alarm \/ Delayed Egress\u003c\/th\u003e\n\u003ctd\u003eNot included – ER EX is not EA or EE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEstimated Shipping Weight\u003c\/th\u003e\n\u003ctd\u003e27 lb estimated for device, 03C trim and packaging; confirm packed weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLimited Warranty\u003c\/th\u003e\n\u003ctd\u003e10 years mechanical \/ 3 years electrical, subject to Detex warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCommercial Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccess-controlled 36-inch hollow metal or other properly prepared commercial doors\u003c\/li\u003e\n\u003cli\u003eAutomatic door operators where a motor-driven latch release is required before door opening\u003c\/li\u003e\n\u003cli\u003eHospitals, schools, government buildings, corporate offices, warehouses and institutional facilities\u003c\/li\u003e\n\u003cli\u003eRemote unlock, scheduled electric dogging and secure exit monitoring applications\u003c\/li\u003e\n\u003cli\u003eSingle doors or pairs with properly selected Detex controllers, strikes and mullions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIncluded in the Exit Device Assembly\u003c\/h3\u003e\n\u003cp\u003eOne \u003cstrong\u003eDetex Advantex 1003C ER EX 630 99 36\u003c\/strong\u003e 36-inch rim exit device with motorized ER latch-retraction option, EX request-to-exit switch, \u003cstrong\u003e03C exterior night-latch pull trim\u003c\/strong\u003e, standard \u003cstrong\u003e99 surface strike\u003c\/strong\u003e, 630 satin stainless finish and factory-standard mounting materials. Confirm the exact wiring package and any mechanical cylinder dogging with the distributor before purchase.\u003c\/p\u003e\n\u003ch3\u003eNot Included Unless Factory Specified\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDetex ER logic controller\/power supply (81-800, 82-800 or 83-800), external power supply equipment, separate rim cylinder for 03C trim, any mechanical dogging cylinder, any special power-transfer hardware not included in the specific factory configuration, doors, frames, mullions, field wiring and installation services.\u003c\/strong\u003e Check the precise supplied connector and power transfer details against the manufacturer packing list.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Ordering Notes\u003c\/h3\u003e\n\u003cp\u003eConfirm the ordered \u003cstrong\u003eER EX versus ER CD\u003c\/strong\u003e suffix with SECLOCK\/Detex because the distributor's URL and product title differ. Verify 03C outside trim and keying, rim cylinder requirements, 99 strike position, door thickness and stile, required 24VDC power\/controller capacity, voltage drop, request-to-exit wiring, power transfer, and local egress and fire-door requirements. \u003cstrong\u003eDo not publish this draft as a confirmed mechanical cylinder-dogging model without supplier verification.\u003c\/strong\u003e The ER motorized release does not change the requirement for unobstructed mechanical emergency egress.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003e48 in — Hex Dogging — DTX-1003C-HD-630-99-48\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eThe \u003cstrong\u003eDetex Advantex 1003C HD 630 99 48\u003c\/strong\u003e combines super-heavy-duty \u003cstrong\u003eANSI\/BHMA A156.3 Grade 1 rim panic exit hardware\u003c\/strong\u003e with \u003cstrong\u003e03C night-latch pull trim\u003c\/strong\u003e for keyed exterior entry and \u003cstrong\u003eHD hex-key dogging\u003c\/strong\u003e for authorized push\/pull operation. Built for compatible \u003cstrong\u003e48-inch \/ 4-foot commercial door openings\u003c\/strong\u003e, the assembly includes the \u003cstrong\u003e99 surface-mounted rim strike\u003c\/strong\u003e and durable \u003cstrong\u003e630 \/ US32D satin stainless steel\u003c\/strong\u003e finish. This non-electrified exit device maintains convenient free mechanical egress from the inside.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e03C Night-Latch Pull Trim:\u003c\/strong\u003e The included exterior \u003cstrong\u003e03C recessed straight-pull plate\u003c\/strong\u003e allows an authorized keyholder to retract the rim latch and pull the door open. The night-latch outside trim does not provide an always-unlocked lever. A compatible \u003cstrong\u003e1-1\/8-inch rim cylinder is required for the 03C pull trim and is sold separately\u003c\/strong\u003e unless specifically included on the supplier order. The trim plate is approximately 3 inches wide by 13-1\/2 inches high, with approximately 2-1\/16-inch projection. Verify current Detex cylinder\/tailpiece and door preparation instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHD Hex Dogging:\u003c\/strong\u003e A standard \u003cstrong\u003e1\/8-turn hex-key dogging mechanism\u003c\/strong\u003e allows authorized personnel to hold the pushpad and latchbolt retracted for normal free-passage operation where dogging is permitted. \u003cstrong\u003eNo dogging mortise cylinder is needed for this HD configuration\u003c\/strong\u003e—unlike the separate CD cylinder-dogging model. The \u003cstrong\u003erim cylinder for the 03C night-latch trim is still required\u003c\/strong\u003e for keyed exterior entry. Because this HD configuration has mechanical dogging, it is \u003cstrong\u003enot fire-rated as ordered\u003c\/strong\u003e and must not be used as a substitute for listed fire-exit hardware requiring positive latching.\u003c\/p\u003e\n\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetex Advantex 10 Series:\u003c\/strong\u003e Super-heavy-duty wide-stile panic exit hardware for high-use commercial, industrial and institutional doors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI\/BHMA Grade 1:\u003c\/strong\u003e Designed for demanding opening cycles and reliable mechanical exit operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48-inch nominal device:\u003c\/strong\u003e Intended for compatible 4-foot-wide openings; field sizing must follow current manufacturer instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e03C exterior night-latch pull included:\u003c\/strong\u003e Recessed stainless straight pull with keyed latch-retracting access; a rim cylinder is required and sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHD hex-key dogging:\u003c\/strong\u003e Authorized mechanical dogging holds the pushpad and latch retracted for normal push\/pull traffic where allowed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo separate dogging cylinder:\u003c\/strong\u003e Hex dogging uses its designated key\/actuator; the rim cylinder serves the 03C outside trim only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetex No. 99 surface rim strike:\u003c\/strong\u003e Standard strike for correctly prepared single-door or approved paired-door mullion applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e630 \/ US32D finish:\u003c\/strong\u003e Brushed satin stainless steel appearance coordinates with commercial hinges, pull trim and protection plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeadlocking Pullman-type latchbolt:\u003c\/strong\u003e Stainless steel mechanical latch supports dependable positive latching when not dogged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-handed construction:\u003c\/strong\u003e Mounts on appropriate right- or left-hand reverse swing doors, subject to the correct trim installation and door preparation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented mounting plate and strike locator:\u003c\/strong\u003e Detex's alignment system simplifies installation and helps reduce rework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty ramped end cap:\u003c\/strong\u003e Helps deflect incidental damage from carts and equipment in busy facilities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoor applications:\u003c\/strong\u003e For properly prepared commercial hollow metal, wood, aluminum or fiberglass doors meeting manufacturer requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical hardware only:\u003c\/strong\u003e No EA exit alarm, EE delayed egress, EX request-to-exit signaling, ER electric latch retraction or electrical power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer warranty:\u003c\/strong\u003e Covered by Detex limited mechanical warranty according to current applicable terms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eDetex Corporation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Series\u003c\/th\u003e\n\u003ctd\u003eAdvantex 10 Series, wide-stile rim panic hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003e1003C HD 630 99 48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShopify SKU\u003c\/th\u003e\n\u003ctd\u003eDTX-1003C-HD-630-99-48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eGrade 1 mechanical rim exit device with keyed outside pull\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Device Length\u003c\/th\u003e\n\u003ctd\u003e48 inches \/ 4 feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDoor Width\u003c\/th\u003e\n\u003ctd\u003eCompatible 48-inch doors; confirm minimum allowed trim width and field sizing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside Trim\u003c\/th\u003e\n\u003ctd\u003e03C night-latch recessed straight pull; key retracts latch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e03C Plate Dimensions\u003c\/th\u003e\n\u003ctd\u003eApprox. 3 in W × 13-1\/2 in H; 2-1\/16 in projection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside Entry Cylinder\u003c\/th\u003e\n\u003ctd\u003eCompatible 1-1\/8-inch rim cylinder required; sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDogging\u003c\/th\u003e\n\u003ctd\u003eHD – mechanical 1\/8-turn hex-key dogging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDogging Cylinder\u003c\/th\u003e\n\u003ctd\u003eNot required for HD hex dogging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrike\u003c\/th\u003e\n\u003ctd\u003eDetex No. 99 surface-mounted rim strike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003e630 \/ US32D – brushed satin stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLatch\u003c\/th\u003e\n\u003ctd\u003eStainless steel deadlocking Pullman-type rim latchbolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHanding\u003c\/th\u003e\n\u003ctd\u003eNon-handed; verify trim prep and swing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard Door Thickness\u003c\/th\u003e\n\u003ctd\u003e1-3\/4 to 2-1\/4 inches; confirm atypical opening requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum Stile with 99 Strike\u003c\/th\u003e\n\u003ctd\u003e4-5\/8 inches per current 10 Series trim reference; verify template\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eANSI\/BHMA A156.3 Grade 1 panic hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFire Rated?\u003c\/th\u003e\n\u003ctd\u003eNo – mechanically doggable HD configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrified Functions\u003c\/th\u003e\n\u003ctd\u003eNone; purely mechanical exit and keyed night-latch pull\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping Weight\u003c\/th\u003e\n\u003ctd\u003e24 lb estimate for 48-inch device, pull trim and packaging; verify actual carton weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eDetex limited manufacturer mechanical warranty; current conditions apply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e48-inch commercial entry and exit doors needing keyed outside access with free mechanical egress\u003c\/li\u003e\n\u003cli\u003eOffice, healthcare, education, government, industrial, institutional and retail facilities\u003c\/li\u003e\n\u003cli\u003eNon-fire-rated openings allowing mechanical dogging during normal staffed hours\u003c\/li\u003e\n\u003cli\u003eHigh-traffic hollow-metal and other compatible prepared doors where commercial Grade 1 panic hardware is specified\u003c\/li\u003e\n\u003cli\u003eSingle doors and compatible paired-door openings with the correct mullion and strike arrangement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne \u003cstrong\u003eDetex Advantex 10 Series 48-inch rim exit device\u003c\/strong\u003e with \u003cstrong\u003eHD mechanical hex dogging\u003c\/strong\u003e, matching \u003cstrong\u003e03C exterior night-latch recessed pull trim\u003c\/strong\u003e, \u003cstrong\u003eNo. 99 surface rim strike\u003c\/strong\u003e, 630 satin stainless finish, and manufacturer-standard mounting components. Factory package contents should be verified before ordering.\u003c\/p\u003e\n\u003ch3\u003eNot Included\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe 1-1\/8-inch rim cylinder for 03C outside trim is not included unless explicitly specified.\u003c\/strong\u003e A separate CD-style mortise dogging cylinder is \u003cstrong\u003enot\u003c\/strong\u003e needed for this hex-dogging model. Door, frame, center mullion, specialty fasteners, additional trim\/cylinders, access-control components, and installation services are not included unless quoted.\u003c\/p\u003e\n\u003ch3\u003eInstallation \u0026amp; Ordering Notes\u003c\/h3\u003e\n\u003cp\u003eConfirm the complete suffix before purchasing: \u003cstrong\u003e1003C\u003c\/strong\u003e = Detex 10 Series with keyed 03C night-latch pull; \u003cstrong\u003eHD\u003c\/strong\u003e = hex dogging; \u003cstrong\u003e630\u003c\/strong\u003e = satin stainless finish; \u003cstrong\u003e99\u003c\/strong\u003e = surface strike; \u003cstrong\u003e48\u003c\/strong\u003e = nominal 48-inch device length. \u003cstrong\u003eDo not confuse this model with 1003C CD cylinder dogging, 1003C EA alarmed versions, 1003C ER EX electric latch retraction or F1003C fire-rated hardware.\u003c\/strong\u003e Check rim cylinder preparation, handed door conditions, minimum stile, length, strike\/trim alignment, and applicable egress\/fire-door codes. Follow Detex installation instructions and use a qualified commercial door-hardware installer.\u003c\/p\u003e\u003c\/details\u003e","brand":"Detex","offers":[{"title":"36 in — Cylinder Dogging","offer_id":68038966444247,"sku":"DTX-1003C-CD-630-99-36","price":1787.3,"currency_code":"USD","in_stock":true},{"title":"48 in — Cylinder Dogging","offer_id":68039212237015,"sku":"DTX-1003C-CD-630-99-48","price":1820.9,"currency_code":"USD","in_stock":true},{"title":"36 in — ER\/EX Electrified","offer_id":68039212269783,"sku":"DTX-1003C-ER-EX-630-99-36","price":2229.92,"currency_code":"USD","in_stock":true},{"title":"48 in — Hex Dogging","offer_id":68039212302551,"sku":"DTX-1003C-HD-630-99-48","price":1820.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/4933\/1927\/files\/DTX10HD6309936__47921.1693377005.jpg?v=1794407487","url":"https:\/\/shop.commercialdoorworx.com\/products\/detex-advantex-1003c-rim-exit-device-36-in-night-latch-pull-cylinder-dogging-630","provider":"Commercial Door Worx","version":"1.0","type":"link"}