Automate a commercial single-door entrance with the Portalp-Tucker Auto-Mation SW10/19 V/5.3 Automatic Swing Door Operator.

Configured for a 36" single swing door, this commercial automatic operator features a pull-arm / slide-track assembly, Clear Anodized aluminum finish, and the V/5.3 control platform.

The SW10/19 platform is designed for dependable commercial swing-door automation and is well suited for accessibility upgrades, healthcare facilities, offices, schools, retail entrances, and other high-traffic commercial openings.

Product Information

• Manufacturer: Portalp / Tucker Auto-Mation

• Model: SW10/19 V/5.3

• Configuration: 36S

• Product: Automatic Swing Door Operator

• Door Configuration: Single Door

• Door Width: 36"

• Arm Type: Pull Arm

• Arm Style: Slide-Track Pull Arm

• Finish: Clear Anodized Aluminum

• Finish Code: CA

• Input Power: 120VAC

• Control Version: V/5.3

• Mounting: Surface Applied

• Application: Commercial Automatic Swing Doors

Key Features

• Designed for 36" single swing doors

• 36S single-door configuration

• Portalp / Tucker Auto-Mation SW10/19 platform

• V/5.3 electronic control system

• Pull-arm / slide-track configuration

• Clear anodized aluminum finish

• 120VAC operator power

• Smooth powered opening

• Controlled closing

• Adjustable operating characteristics

• Commercial-duty construction

• Suitable for accessibility applications when properly configured

• Surface-applied design

• Interfaces with compatible activation and safety devices

• Ideal for new installations, retrofits, and replacement applications

36" Single-Door Application

This operator is configured for:

36" Single Swing Doors

The 36S configuration is commonly used on commercial pedestrian doors where automatic or low-energy operation is required.

Always verify actual door width, frame conditions, and mounting clearances before installation.

Pull Arm / Slide Track

This configuration uses a:

Pull Arm with Slide Track

The pull arm is designed for applications where the operator is mounted on the side toward which the door swings.

The Tucker pull-arm assembly includes components such as:

• Primary arm

• Slide track

• Slide block assembly

• End caps

• Spindle adapter

• Associated arm hardware

Proper arm geometry is essential for smooth operation and correct spring preload.

Clear Anodized Finish

The operator/header is supplied in:

CA – Clear Anodized Aluminum

This architectural finish coordinates well with common commercial aluminum storefront and entrance systems.

Clear anodized aluminum is especially well suited for:

• Storefront entrances

• Office buildings

• Hospitals

• Medical facilities

• Schools

• Government buildings

• Institutional facilities

SW10 / SW19 Platform

The Tucker Auto-Mation platform supports two primary operating applications:

• SW10 – Full Power

• SW19 – Low Energy

The exact operating mode should be verified based on the supplied controller, programming, sensors, and complete installation.

V/5.3 Control System

The V/5.3 control system manages the automatic-door operating sequence.

Adjustable functions include items such as:

• Opening time

• Closing time

• Hold-open time

• Activation response

• Lock interface

• Safety inputs

• Operator setup

The system is designed to integrate with compatible automatic-door accessories.

120VAC Power

The SW10/19 operator uses:

120VAC Main Power

Proper electrical installation and grounding are required.

Power should be connected according to manufacturer instructions by qualified personnel.

Access Control & Activation Compatibility

Depending on the application, the operator can interface with compatible equipment such as:

• Handicap push plates

• Wireless push buttons

• Touchless activation switches

• Motion sensors

• Presence sensors

• Card readers

• Keypads

• Electric strikes

• Magnetic locks

• Access-control relays

Always confirm accessory compatibility before installation.

Low-Energy Applications

The SW19 configuration can be used for low-energy automatic-door applications when properly set up.

Tucker recommends appropriate activation and presence-sensing equipment based on the installation.

Final installation must comply with applicable automatic-door, accessibility, and life-safety requirements.

Commercial Applications

Ideal for:

• Hospitals

• Healthcare facilities

• Assisted living facilities

• Retail stores

• Office buildings

• Schools

• Universities

• Government facilities

• Hotels

• Commercial buildings

• Institutional facilities

• Public-access entrances

Replacement & Retrofit Applications

The SW10/19 V/5.3 is well suited for replacing or servicing existing Tucker Auto-Mation installations.

Before replacing an existing operator, verify:

• Door width

• Door handing

• Existing pull-arm configuration

• Header mounting location

• Control version

• Activation wiring

• Safety-device wiring

• Electric-lock interface

• Existing door condition

Professional Installation Recommended

Automatic swing-door operators require precise setup.

After installation, verify:

• Opening angle

• Opening speed

• Closing speed

• Hold-open time

• Pull-arm alignment

• Slide-track position

• Mechanical stops

• Door alignment

• Activation devices

• Safety sensors

• Locking hardware

• Complete automatic-door operation

The entire entrance should be tested before returning it to normal service.

Important Ordering Information

Before ordering, verify:

• SW10/19 V/5.3

• 36S configuration

• 36" single door

• Pull-arm application

• Clear anodized finish

• 120VAC power

• Door handing

• Header mounting conditions

• Activation-device requirements

• Safety-device requirements

• Locking-hardware requirements

This listing is for the configured automatic swing-door operator described above. Activation devices, sensors, electric locks, access-control equipment, and other field accessories are not included unless specifically stated.