Provide secure locking and self-latching protection for compatible wood-framed sliding doors with the Adams Rite 5017 Deadlock/Deadlatch.

Designed specifically for wood sliding-door applications, the 5017 combines a heavy-duty laminated stainless-steel anti-lift bolt with an adjustable, self-protecting design.

The bolt can be adjusted to compensate for door-to-jamb alignment, and if the door is closed while the bolt is projected, the bolt automatically retracts upon contacting the jamb—helping prevent damage and accidental lockout.

Key Features

• Genuine Adams Rite / ASSA ABLOY

• Model 5017

• Deadlock / deadlatch for sliding wood doors

• Designed for wood-framed sliding-door applications

• Three-ply laminated stainless-steel bolt

• Approximately 1,000 lb. bolt strength

• Anti-lift bolt design

• Helps resist pry attacks

• Helps prevent the door from being lifted from its track

• Adjustable bolt projection

• Up to 3/16" adjustment

• Self-protecting bolt automatically retracts upon jamb contact

• 45° key or turn operation

• Deep backset for recessed wood-door jambs

• Compatible with optional 4026 keyed cylinder pull

• Compatible with 1015 interior turn

• Optional 4810 wood-door box strike

Designed for Wood Sliding Doors

The Adams Rite 5017 is specifically designed for wood-framed sliding doors where the deeper recessed jamb requires more backset than a typical aluminum-stile sliding-door lock.

It provides similar heavy-duty locking performance to the Adams Rite MS1847 while accommodating the construction of compatible wood doors.

Heavy-Duty Anti-Lift Bolt

The 5017 uses a:

Three-Ply Laminated Stainless-Steel Bolt

The bolt is designed to withstand approximately:

1,000 lbs. / One-Half Ton of Horizontal or Vertical Force

Its anti-lift configuration helps resist:

• Door-to-jamb pry attacks

• Attempts to spread the opening

• Attempts to lift the sliding door from its track

Adjustable Bolt Projection

One of the key features of the 5017 is its adjustable bolt.

Bolt projection can be lengthened or shortened approximately:

3/16"

Adjustment is made using the exposed screw in the face of the lock.

This can help compensate for moderate:

• Door misalignment

• Jamb variation

• Installation tolerance

• Wear or movement in the sliding-door system

Self-Protecting Deadlatch Function

The 5017 incorporates a self-protecting bolt design.

If the sliding door is closed while the bolt is already projected, contact with the jamb causes the bolt to:

Automatically Retract

This helps reduce the risk of:

• Lock damage

• Jamb damage

• Accidental lockout

• Damage caused by slamming the door against an extended bolt

45° Operation

The lock requires only:

45° Rotation

of the compatible key cylinder or interior turn to:

• Project the bolt

• Retract the bolt

This short operating movement makes the lock convenient for sliding-door applications.

Cylinder Backset

The 5017 has a deeper backset specifically suited to wood-door construction.

Cylinder Backset: 1-3/16"

Including the faceplate:

Overall Backset: Approximately 1-1/4"

Always verify the door preparation before ordering or installation.

Lock Case

The stainless-steel lock case measures approximately:

Width: 1/2"
Height: 4"
Depth: 1-19/32"

The narrow case allows the mechanism to fit within compatible wood sliding-door construction.

Faceplate

The stainless-steel faceplate measures approximately:

5/8" x 4-1/2"

and features radiused ends.

Through-Bolt Mounting

The 5017 mounts using through-bolts.

These bolts also secure compatible operating trim such as:

• Interior turn

• Exterior keyed cylinder pull

This mounting arrangement provides a secure mechanical connection through the door.

4026 Cylinder Pull

For keyed exterior operation, the compatible:

Adams Rite 4026 Cylinder Pull

is available separately.

The 4026 is specifically designed for use with the 5017 Wood Door Deadlock/Deadlatch.

It combines:

• Exterior door pull

• Five-pin tumbler cylinder

• Keyed lock operation

Available keyway options may include:

• Schlage

• Weiser

depending on configuration.

1015 Interior Turn

The compatible:

Adams Rite 1015 Turn

is available separately for interior operation of the 5017.

The 1015 may be used:

• With a 4026 keyed exterior cylinder pull

• With a 1016 exterior blank plate when exterior keyed access is not required

Always match the correct spindle and trim configuration to the door thickness.

1016 Blank Plate

The 1016 Blank Plate is available for applications where a keyed exterior cylinder is not required.

It can be paired with the 1015 interior turn for inside-only lock operation.

Door Thickness

Compatible trim configurations accommodate a range of wood-door thicknesses.

Depending on the selected trim arrangement, compatible doors may range approximately from:

5/6" to 2-1/4" Thick

Verify the selected cylinder pull, turn, spindle, and mounting hardware for the actual door thickness.

Optional 4810 Box Strike

For compatible wood-jamb installations, the:

Adams Rite 4810 Box Strike

is available separately.

The box strike provides a finished receiving pocket for the 5017 locking bolt.

ICU / Healthcare Applications

The 5017 can also be paired with the optional:

Adams Rite 4570 ICU Latch Operator

for compatible sliding-door healthcare applications.

The 4570 provides ergonomic handles on both sides of the opening and operates the 5017 in its self-latching configuration.

This arrangement is commonly associated with sliding doors used in healthcare and ICU environments.

Common Applications

Ideal for compatible:

• Wood-framed sliding doors

• Commercial sliding wood doors

• Healthcare sliding doors

• ICU sliding doors

• Institutional facilities

• Office interiors

• Commercial facilities

• Specialty sliding-door applications

Product Specifications

Brand: Adams Rite
Model: 5017
Product Type: Deadlock / Deadlatch
Door Application: Wood-Framed Sliding Doors
Bolt Material: Three-Ply Laminated Stainless Steel
Approximate Bolt Strength: 1,000 lbs.
Bolt Adjustment: Up to 3/16"
Bolt Function: Adjustable / Self-Protecting / Anti-Lift
Operation: 45° Key or Turn Rotation
Cylinder Backset: 1-3/16"
Backset Including Faceplate: Approx. 1-1/4"
Case: Stainless Steel
Case Size: 1/2" x 4" x 1-19/32" Deep
Faceplate: 5/8" x 4-1/2"
Mounting: Through-Bolt
Exterior Cylinder Pull: 4026 Available Separately
Interior Turn: 1015 Available Separately
Blank Plate: 1016 Available Separately
Wood Strike: 4810 Available Separately

What's Included

Standard package includes:

• 1 Adams Rite 5017 Deadlock/Deadlatch

• Lock body / bolt assembly

Exact mounting hardware should be verified with the selected configuration.

Not Included Unless Specifically Stated

• 4026 cylinder pull

• 1015 interior turn

• 1016 blank plate

• 4810 box strike

• 4570 ICU latch operator

• Door

• Frame

• Additional trim

Important Ordering Information

Before ordering, verify:

• Door is a compatible wood sliding door

• Door thickness

• Cylinder backset

• Existing door preparation

• Keyed or non-keyed exterior operation

• Required cylinder pull

• Interior turn configuration

• Whether a 4810 strike is required

• Whether the lock will be used with a 4570 ICU operator

Important

The 5017 is designed specifically for wood-framed sliding doors.

For comparable ultra-narrow aluminum-stile sliding-door applications, Adams Rite offers the MS1847 Deadlock/Deadlatch.