The Alarm Lock 22 EXIT PULL Outside Emergency Door Pull is a commercial-grade exterior pull handle accessory designed for use with compatible Alarm Lock Sirenlock and Sentrygard alarmed exit devices.

Featuring a T-shaped pull handle, satin aluminum finish, and through-door mounting design, this accessory provides a convenient exterior gripping point for compatible commercial emergency exit door installations.

The Model 22 is designed to work with Alarm Lock exit hardware, including the 250 Series, 260 Series, and 11A Series. Its mechanical mounting arrangement allows it to be installed on the exterior side of a door while working with the compatible interior exit device assembly.

Manufactured for commercial door hardware applications, the pull provides a practical solution for buildings requiring exterior door-pull hardware in conjunction with alarmed exit equipment.

The US28 / 628 Satin Aluminum finish complements aluminum storefront doors, hollow metal doors, and other commercial architectural hardware.

The Alarm Lock 22 EXIT PULL is a mechanical accessory and does not include its own locking mechanism, audible alarm, or electronic components.

Key Features and Benefits

Exterior Emergency Door Pull

• Provides a mechanical pull handle on the exterior of compatible alarmed exit doors.

• T-shaped handle provides a convenient gripping surface.

• Designed for use with Alarm Lock emergency exit security hardware.

• Suitable for commercial door installations requiring an exterior pull.

• Works in conjunction with the existing interior exit device.

Compatible with Alarm Lock Exit Devices

The Model 22 is listed for use with:

• Alarm Lock 250 Series Alarmed Panic Locks

• Alarm Lock 260 Series Alarmed Panic Locks

• Alarm Lock 11A Series Sentrygard Exit Locks

Alarm Lock's installation template also identifies additional compatible models within its 70, 172, 265, 270, 272, 700, 710, 715, 720, and 722 product families.

Installation configurations and hardware arrangements vary depending on the exit device model.

Through-Door Mounting

• Designed for mounting through the commercial door.

• Uses a center opening for the exterior pull assembly.

• Through-bolt mounting arrangement helps secure the pull.

• Manufacturer provides drilling patterns for compatible exit devices.

• Suitable for left-hand and right-hand installation layouts.

• Designed to operate with the appropriate interior hardware assembly.

Commercial Aluminum Finish

• Satin aluminum finish designated 628 / US28.

• Complements aluminum storefront door systems.

• Coordinates with compatible Alarm Lock exit devices.

• Neutral silver appearance suitable for commercial architectural applications.

• Appropriate for matching commercial door hardware packages.

Mechanical Operation

• No electrical power required for the pull itself.

• Does not require batteries.

• No separate electronic programming.

• Operates in conjunction with compatible mechanical exit hardware.

• Does not independently bypass the locking mechanism.

• Compatible access or release operation depends on the installed Alarm Lock device.

Technical Specifications

How the Alarm Lock 22 EXIT PULL Works

1. Exterior Handle Installation

The Model 22 pull is installed on the exterior side of the commercial door using the appropriate manufacturer mounting pattern.

2. Connection to Existing Exit Hardware

The pull assembly is secured through the door in coordination with the compatible interior Alarm Lock exit device.

3. Authorized Door Operation

When the associated locking device has been properly released or unlocked, the exterior pull provides a convenient handle for opening the door.

4. Existing Alarm and Lock Functions

The installed Alarm Lock exit device continues to provide its applicable locking, latching, and alarm functions.

5. Normal Exit Operation

The Model 22 does not replace the interior exit hardware or its emergency egress function.

Installation Specifications

Alarm Lock provides a dedicated installation template for the Model 22 Outside Door Pull.

Door Preparation

The manufacturer specifies:

• Main Pull Opening: One 1" diameter through-door hole.

• Mounting Bolt Openings: Two 7/32" diameter through-door holes.

• Mounting Hole Spacing: 3-1/8" between mounting bolt hole centers.

• Pull Location: Determined by the associated exit device and manufacturer template.

Mounting Pattern

Dimensions A and B are installation layout references shown on the manufacturer's drilling template, not the physical dimensions of the pull handle.

Confirm the specific template before drilling, particularly for Model 11A applications.

Typical Commercial Applications

Retail Stores and Shopping Centers

• Rear service entrances

• Emergency exit doors

• Stockroom exit openings

• Commercial storefront doors

Warehouses and Distribution Centers

• Shipping and receiving entrances

• Employee service doors

• Emergency exits

• Restricted access openings

Schools and Educational Facilities

• Gymnasium exit doors

• Maintenance access doors

• Secondary building entrances

• Monitored exterior openings

Hospitals and Healthcare Facilities

• Service corridor doors

• Controlled exterior entrances

• Emergency exit hardware installations

• Facility maintenance entrances

Commercial Office Buildings

• Rear building exits

• Stairwell exterior doors

• Utility and maintenance entrances

• Alarmed exit door installations

Industrial and Government Facilities

• Service access doors

• Emergency exit installations

• Controlled facility entrances

Product Components

The Model 22 is sold as an outside pull accessory for compatible Alarm Lock exit devices.

The manufacturer's installation illustration identifies the following installation components:

• T-shaped exterior door pull

• Exterior warning plate

• Through-door mounting bolts

• Washers and device-specific connecting hardware

Note: Confirm the exact supplied hardware contents for the current factory package. The matching Alarm Lock exit device and any required key cylinder are not included.

Installation Requirements

Installation should be performed in accordance with the Alarm Lock Model 22 mounting instructions.

1. Verify Compatibility

Confirm the installed exit device model and identify the correct mounting layout.

2. Mark Door Preparation

Use the manufacturer's drilling template to locate the pull opening and mounting holes.

3. Prepare the Door

Drill the required mounting openings using appropriate tools for the door construction.

4. Install Exterior Pull

Position the pull assembly and required exterior components.

5. Secure to Interior Hardware

Fasten the assembly using the mounting arrangement specified for the applicable exit device.

6. Verify Operation

Confirm proper door opening, latching, locking, and alarm operation after installation.

Important Installation Notes

• The Model 22 is an accessory, not a complete exit device.

• It does not provide standalone door locking.

• It does not include an integrated siren or power supply.

• It does not independently authorize exterior entry.

• The existing exit device must be compatible with the pull.

• Door preparation must follow the correct device-specific mounting template.

• Installation must not interfere with required emergency egress or fire-rated assembly requirements.

Why Choose the Alarm Lock 22 EXIT PULL?

The Alarm Lock 22 EXIT PULL Outside Emergency Door Pull provides a practical exterior handle solution for commercial doors equipped with compatible Alarm Lock alarmed exit hardware.

Its T-handle design, satin aluminum finish, and manufacturer-supported mounting configurations make it an appropriate accessory for new commercial installations and replacement hardware projects.

For facilities using Alarm Lock 250, 260, or 11A exit devices, the Model 22 provides an exterior pull option while retaining the capabilities of the existing alarmed exit system.