Value Series Weatherized Battery Exit Alarm | Cylinder Dogging | 104358-3 / 104358-7

Upgrade or repair a compatible Detex Value Series weatherized exit device with the SIFV-EB-W-CD Slide-In Filler Kit, combining cylinder dogging with Detex's EB-W weatherized battery-powered exit alarm.

Available for both 36" and 48" Value Series devices, this factory replacement assembly is designed for exterior, wet, and demanding commercial environments where unauthorized exit monitoring and weather resistance are required.

When the alarm is armed, movement of the exit-device pushpad activates an approximately 100 dB audible alarm, immediately alerting employees, management, or security personnel to use of the exit. The EB-W system also provides remote signaling and remote bypass capabilities.

Available Sizes

36" Device

Model: SIFV-EB-W-CD-36
Detex Part Number: 104358-3
Device Length: 36" / 3 Foot

Detex identifies 104358-3 as the EB-W weatherized fillerplate subassembly for 3-foot devices.

48" Device

Model: SIFV-EB-W-CD-48
Detex Part Number: 104358-7
Device Length: 48" / 4 Foot

Detex identifies 104358-7 as the EB-W weatherized fillerplate subassembly for 4-foot devices.

Key Features

• Genuine Detex Value Series replacement assembly

• Available for 36" or 48" devices

• EB-W – Weatherized Exit Alarm

• Battery-powered alarm operation

• 9V battery system

• Approximately 100 dB audible alarm

• CD – Cylinder Dogging

• 1/8-turn cylinder dogging

• Pushpad movement monitoring

• Visual and audible arming indicators

• Remote alarm signaling capability

• Remote bypass capability

• Low-battery alert

• Manual key arming

• Field-selectable 2-minute automatic rearm

• Designed for exterior and wet-location applications

• Slide-in filler design simplifies repair and replacement

• Commercial and institutional access-security application

Weatherized EB-W Exit Alarm

The EB-W configuration is specifically designed for doors and gates requiring a stand-alone, battery-powered, weatherized alarmed panic device.

When the alarm is armed and the pushpad is operated, the internal alarm sounds at approximately 100 dB.

This makes the system particularly useful for:

• Unauthorized-exit detection

• Loss prevention

• Perimeter security

• Employee exits

• Emergency exits

• Exterior gates

• Loading areas

• Wet or exposed environments

Detex specifically positions EB-W for outdoor and wet applications.

Weather-Resistant Construction

The Detex EB-W platform has been tested for demanding outdoor conditions, including:

• MIL-STD 810F Method 506.4 – Driving Rain

• MIL-STD 810F Method 509.4 – Salt Fog

• UBC 7-2 – Positive Pressure

The design also incorporates UV- and temperature-resistant materials and a tapered profile intended to help shed rainwater.

Cylinder Dogging – CD

The CD configuration provides key-controlled cylinder dogging.

Detex specifies:

1/8-turn cylinder dogging

Dogging allows authorized personnel to hold the exit-device pushpad in the retracted position for free passage when appropriate.

A compatible mortise cylinder is required for the cylinder-controlled functions. Detex identifies cylinder dogging on Value Series hardware as a mortise-cylinder application.

Battery-Powered Alarm

The EB-W system uses a 9V battery-powered alarm system, allowing alarm operation without relying solely on a conventional dedicated alarm power supply.

Benefits include:

• Self-contained alarm operation

• Simplified retrofit applications

• Immediate audible notification

• Low-battery warning

• Reduced dependence on building wiring for the basic alarm function

Always verify the exact battery and wiring requirements of the existing device before service.

Pushpad Monitoring

The EB-W system monitors movement of the exit-device pushpad.

When armed:

Pushpad Activated → Alarm Sounds

This helps identify unauthorized use of emergency and restricted exits.

Remote Signal

The EB-W platform includes a remote alarm relay output, allowing the alarm condition to interface with compatible remote monitoring equipment.

Detex specifies relay contacts for:

• Common

• Normally Open

• Normally Closed

This can allow alarm activity to be transmitted to compatible security or monitoring systems.

Remote Bypass

A standard remote bypass input allows compatible external controls to bypass the alarm when authorized access or egress is required.

This can be useful with:

• Access-control systems

• Security stations

• Key switches

• Building-management systems

• Other approved control equipment

Alarm Rearm Options

The EB-W platform supports:

Manual Key Rearm

Authorized personnel reset the alarm using the cylinder.

Automatic Rearm

A field-selectable setting permits approximately 2-minute alarm duration followed by automatic rearm.

Compatible Value Series Devices

The EB-W platform is used with compatible weatherized Value Series exit devices, including applicable:

• V40xW Rim Exit Devices

• V50xW Surface Vertical Rod Devices

• V51xW Surface Vertical Rod Devices

Always verify the existing device model, device length, alarm function, and dogging configuration before ordering.

Product Specifications

Manufacturer: Detex
Series: Value Series
Product Type: Slide-In Filler / Weatherized Alarm Assembly
Alarm Function: EB-W – Weatherized Exit Alarm
Dogging: CD – Cylinder Dogging
Power: 9V Battery System
Alarm Output: Approximately 100 dB
Pushpad Monitoring: Yes
Remote Signal: Yes
Remote Bypass: Yes
Low-Battery Alert: Yes
Cylinder Dogging: 1/8 Turn
Weatherized: Yes
Application: Service / Repair / Upgrade

36" Configuration

Model: SIFV-EB-W-CD-36
Part Number: 104358-3
Device Size: 36" / 3 Foot

48" Configuration

Model: SIFV-EB-W-CD-48
Part Number: 104358-7
Device Size: 48" / 4 Foot

Common Applications

Ideal for:

• Exterior commercial exits

• Retail loss-prevention exits

• Warehouses

• Loading docks

• Distribution centers

• Manufacturing facilities

• Schools and universities

• Government facilities

• Parking facilities

• Exterior gates

• Employee exits

• Perimeter-security openings

• Wet or harsh environments

Important Fire-Rated Door Note

Cylinder Dogging should not be used where the fire exit hardware is required to remain positively latched.

Detex specifies Less Dogging (LD) for fire-rated Value Series configurations rather than cylinder dogging.

For a fire-rated opening, verify the complete device configuration and applicable listing before ordering.

Important Ordering Information

Before ordering, confirm:

• Existing Detex Value Series model

• Weatherized device configuration

• 36" or 48" device length

• EB-W alarm requirement

• Cylinder dogging requirement

• Existing fillerplate assembly

• Mortise cylinder requirements

• Fire-rating requirements

• Any required remote signaling or bypass connections

This is a service / repair filler assembly, not a complete panic device.

What's Included

(1) Detex SIFV-EB-W-CD Weatherized Alarm Fillerplate Assembly